We have five Hitachi Seiki lathes with fanuc and Seikos controls. I am looking for technition that has experience with these machines to trouble shoot and repair them when needed. We are located in Oxnard CA.
Results 1 to 2 of 2
-
12-07-2009, 05:59 PM #1
Registered
- Join Date
- Oct 2006
- Posts
- 60
Hitachi seiki/Fanuc/seikos tech needed
-
12-17-2009, 02:57 AM #2
Registered
- Join Date
- Dec 2007
- Posts
- 7
The company I work for, Studwell Engineering is owned by Uptime Electronics (full disclosure). They are in Whittier and are very good with Fanuc controls. They have a service man (Scott) that lives in Ventura Co. If he is available or you are willing to wait until he becomes available they would probably charge you travel and mileage from his home and not from Whittier. I don’t work for this company and have no authority to speak for them so you would need to call them and ask them about it.
Uptime Electronics, Inc
2520 Pacific Park Drive
Whittier, CA 90601
(562) 692-7072Greg Rockwood
Machine tool repair and rebuilding in Los Angeles CA www.Studwellengineering.com
Reply With QuoteSimilar Threads
-
Hitachi seiki seikos III
By dungvp in forum DNC Problems and SolutionsReplies: 4Last Post: 11-19-2012, 05:45 PM -
Hitachi Seiki Seikos III Help
By Andy177 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 02-24-2010, 05:46 AM -
1992 hitachi seiki seikos m control
By masterfabr in forum CNC Machining CentersReplies: 2Last Post: 03-31-2008, 12:55 AM -
Hitachi seiki seikos III
By dungvp in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 01-20-2007, 11:10 AM
Posting Permissions
