HI EVERYBODY , CAN SOMEBODY HELP ME WITH AUTO TOOL ZERO WITH MACH 3 . I CONNECTED ONE WIRE ON INPUT #3 - PORT 1 - PIN 10 AND OTHER WIRE ON GND . WHEN I CONNECTED TOGETHER - TRIGGERD I HAVE ON DIAGNOSTIC SCREEN LED IS GO ON . BUT THAT IS ALL . I DO KNOW WHAT I MUST NEXT TO DO . MUST I HAVE SOME AUTO TOOL ZERO SCRIPT OR TOOL CHANGE MACRO OR ....? I SEE ON YOUTUBE THAT PEOPLE PUT A THIN SHEET OF METAL PLATE BELOW THE TOOL AND THEN JOG THE Z AXE , AFTER TOOL TOUCH THE PLATE GO UP . CAN SOMEBODY HELP ME WHIT THAT . THANK YOU IN ADVANCE .:wave::wave:
Thread: AUTO TOOL ZERO WITH MACH 3
Results 1 to 2 of 2
-
12-12-2009, 07:45 PM #1
Registered
- Join Date
- Aug 2009
- Posts
- 33
AUTO TOOL ZERO WITH MACH 3
-
12-12-2009, 07:49 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Everything you need is here.
http://www.cnczone.com/forums/showthread.php?t=36099Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Auto tool zero
By kentavv in forum Mach MillReplies: 30Last Post: 10-08-2010, 05:03 PM -
Auto Tool Zero and Ver .029
By m1911bldr in forum Mach MillReplies: 1Last Post: 11-13-2009, 02:34 PM -
auto tool zero help
By 15mgtar in forum Mach Software (ArtSoft software)Replies: 3Last Post: 08-12-2009, 03:16 PM -
Problems with auto tool zero
By Mephysto in forum Mach Software (ArtSoft software)Replies: 3Last Post: 12-15-2008, 01:43 AM -
Auto Tool Zero
By Moondog in forum Machines running Mach SoftwareReplies: 13Last Post: 12-23-2006, 01:02 AM
Posting Permissions
