[raetschakarle]

Hi y'all,

I am new to the CNCzone and I am a real newbie!!
Can anybody out there help me with my Mitsubishi Meldas CNC?
The CNC is initialized and the software is loaded from the Floppy into the CPU.

I have a ready light!
But only the x-axis is activated. I have a quote from a Mitsubishi technician but it is quite expensiv.
How can I go into the CNC and change the System Parameter!
Thx

Raetschakarle

[parshad.r]

Hi
From where you are. you may contact to Meservices. they are providing services specialy for mazak.Adress is as below.
[email protected]
ME Services - For Service, Training and Installation of Mazak Machine Tools World Wide

I have also one problem. I have Mazak AJV 35/60. whose controller is medas
FCA 335M. I need system data& parameter ,

BND no of system is 212w001-c2
BND no of Parameter is 212w800-c2.

IF you have same system can you give me a copy of same.I can also pay if you like.


regards

Rajender (from India)