565,202 active members*
4,154 visitors online*
Register for free
Login
Results 1 to 10 of 10
  1. #1
    Registered
    Join Date
    Dec 2009
    Posts
    41

    New to me Tree 320

    Does anybody have any info on a Tree 320? I currently have nothing.

  2. #2
    Registered
    Join Date
    Feb 2008
    Posts
    243
    I have all thje doc for the J300 which I can email you . They should be similar. to the 320


    Quote Originally Posted by ktmrider View Post
    Does anybody have any info on a Tree 320? I currently have nothing.

  3. #3
    Registered
    Join Date
    Dec 2009
    Posts
    41
    Great! I send you a PM. Thanks.

  4. #4
    Registered
    Join Date
    Jun 2007
    Posts
    190
    I have a Journeyman 320 which came with the wiring prints and maintenace manuals.

    I bought the "Operating and Programming Manual" seperatley but it didn't have anything to do with my machine. If your machine has a CRT and takes regular G-code then the manual I purchased is probably correct for your machine. If your machine is like mine, then I don't have a manual but this sample code template should get you started.

    Pete
    Attached Files Attached Files

  5. #5
    Registered
    Join Date
    Dec 2009
    Posts
    41
    The machine is actually a Journeyman 330. I was mistaken earlier. Does anybody have the electrical prints for a 330?

  6. #6
    Registered
    Join Date
    Dec 2009
    Posts
    41
    Thanks for the code help P!

  7. #7
    Registered
    Join Date
    Jun 2007
    Posts
    190
    I made a custom post-processor for VisualMill 6.0 if your machine uses the same syntax as mine.

    The machine will accept modal commands but I find it easier to debug hand written code if I put in all the fields. There isn't much need to hand edit with VisualMill so my post-processor uses modal commands which reduces the file size by about 80%. This comes in very handy on a machne that communicates at 1200 BAUD and only has 64K of program space.

    Pete

  8. #8
    Member
    Join Date
    Jul 2017
    Posts
    5

    Re: New to me Tree 320

    Would you share a pdf copy of the maintenance manual with me?


    Thank you very much
    checkko

  9. #9
    Registered
    Join Date
    Jun 2007
    Posts
    190

    Re: New to me Tree 320

    Sorry for the delay in responding but it is a pretty old thread. ;-)

    I actually have quite a bit of documentation that came with the mill. It will take a while for me to find time to scan it all.
    Attachment 487020
    The large one on the left is wiring diagrams.

  10. #10
    Registered
    Join Date
    Aug 2012
    Posts
    41

    Re: New to me Tree 320

    What controls does it have? I have Install and Operation manuals for the Dynapath Delta 20, along with some remaining hardware (control panel, etc.).
    I also have a complete Delta 50 system complete with manuals as well that is no longer in use.
    I upgraded my J320 to a Mach4 system that uses the original servo amps and brushed servo motors.

Similar Threads

  1. Tree 325
    By sortafast in forum Tree
    Replies: 7
    Last Post: 06-17-2013, 08:55 PM
  2. Tree 325
    By jdracing in forum Tree
    Replies: 15
    Last Post: 04-17-2010, 03:33 AM
  3. tree 2uvr-c tree mill
    By willcofab in forum Tree
    Replies: 1
    Last Post: 06-11-2009, 07:40 PM
  4. Tree 300
    By catskin in forum Tree
    Replies: 1
    Last Post: 12-31-2007, 07:43 AM
  5. tree 425 cat 40 help
    By stanglou in forum Tree
    Replies: 4
    Last Post: 02-22-2007, 12:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •