This is the path that I took in Mach3 view, Load screens, addons, circle center, circle center set the back to mach3. Now all I have is a blue screen. What did I do wrong and how do I get the main screen back?
This is the path that I took in Mach3 view, Load screens, addons, circle center, circle center set the back to mach3. Now all I have is a blue screen. What did I do wrong and how do I get the main screen back?
Tony,
You went wrong by selecting a screen out of the main Mach3 folder, just go back to the main Mach3 folder
Lathe screen files end in *.lset, mill is *.set
So if you are using lathe you have to change the files of type to suit your machine
If you want to use a third party screenset it may have to have the bitmap files added to the folder BITMAPS there are two folders there one for lathe and one for mill
Phil
View>Load Screens and choose 1024.set in the main Mach3 folder.
You tried to load a wizard screen. You need to just run the wizard from Mach3.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks for the help. The 1024 did the trick.