585,748 active members*
3,541 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hyundai Kia > Hyundai SKT21 LMS Sub Spindle Chuck Open/Close

Thread: Hyundai SKT21 LMS Sub Spindle Chuck Open/Close

Results 1 to 3 of 3
  1. 10-05-2022, 02:06 AM #1
    WoodallMFG
    WoodallMFG is offline
    Join Date
    Dec 2019
    Posts
    17

    Hyundai SKT21 LMS Sub Spindle Chuck Open/Close

    Seems like a silly issue I'm having, but I can't figure out how to use the control buttons to open and close my sub spindle chuck. M codes work fine, but I need to be able to remove my part once the program has completed. Thank in advance.
    Reply With Quote Reply With Quote
  2. 01-03-2023, 11:16 AM #2
    Pucas
    Pucas is offline Member
    Join Date
    Nov 2013
    Posts
    17

    Re: Hyundai SKT21 LMS Sub Spindle Chuck Open/Close

    Hi! Normaly there should be an operating panel of sub spindle. Can you share a picture of your operation panel?

    Click image for larger version.  Name: OP Sub Sp.jpg  Views: 1  Size: 19.5 KB  ID: 487911
    Reply With Quote Reply With Quote
  3. 01-06-2023, 03:36 AM #3
    WoodallMFG
    WoodallMFG is offline
    Join Date
    Dec 2019
    Posts
    17
    I'm not in front of the machine right now, but yes there are sub chuck open/close buttons. When I press it, nothing happens. I can only open/close using M-codes at this time.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Hyundai Skt21 LMS Fusion 360 Post Processor
    By WoodallMFG in forum Autodesk Post Processors
    Replies: 1
    Last Post: 09-27-2022, 02:07 PM
  2. Hyundai SKT21 LMS Lathe Q Setter enable
    By WoodallMFG in forum Hyundai Kia
    Replies: 10
    Last Post: 07-26-2022, 03:40 PM
  3. Hyundai Skt21 LMS Fusion 360 Post Processor
    By WoodallMFG in forum Autodesk CAM
    Replies: 0
    Last Post: 07-24-2022, 04:07 PM
  4. Chuck open close
    By Imperial Sewing in forum Mitsubishi controls
    Replies: 0
    Last Post: 07-11-2016, 07:02 PM
  5. Open and close while running HL-2 chuck??
    By acrodave in forum Haas Lathes
    Replies: 5
    Last Post: 08-14-2009, 05:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules