[raymond.baker8@]

I bought a colchester 3000L but about three day after delivery strange characters
started to appear and alarms e.g 940 time out. I rang machinery 600 and they told me that the motherboard has a fault. I have changed the mother board but couldn't get parameters out.I have set of parametrs i got from FANUC in the UK
but these parameters cannot controll the dulomatic 4 station tool post as when it goes to index it will not stop at all . Thank yous for any help with this problem in advance.

[guhl]

Did you fill diagnostic parameter 500 with content 00000010?

[raymond.baker8@]

Did you fill diagnostic parameter 500 with content 00000010?

Did you fill diagnostic parameter 500 with content 00000010?
__________________
Yes the diagnostic parameter 500 is set at 00000010 before changing mother board every thing worked fine.Should i change all EPROM from my orginal board to to the new board.

[LSR_SERVICE]

Dear sir

pl req. me colchester 3000L fanuc OTA control
900 series option parameter,

[Bhuvananbu]

Please send parameters and diagnosis backup for Colchestercnc 4000 lathe with Fanuc OT.