510,023 active members
3,551 visitors online
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    Dec 2009
    Posts
    2

    Aerotech amps and servo

    Hi I have two Aerotech AS32020 Amps and BM75 Servos I can find info on the servos but no connection detail for the amps, they would have been in a unidex unit can I drive them from a pc if I build the required PSU. Thanks for any help best regards peter

  2. #2
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Posts
    23197
    I have had excellent response from Aerotech support when requesting info on legacy equip.
    Just as recently as last week.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  3. #3
    Registered
    Join Date
    Dec 2009
    Posts
    2
    Thanks for the advice, aerotech wont give connection data for the amps, classed as confidential information. My last resort was here !

  4. #4
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Posts
    23197
    Those are DCBL motors, take a look at the DCBL drives and see if any resemble them, they are probably re-labled due to proprietary end user.
    Post a picture of the drive, I may be able to locate it in a catalogue.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  5. #5
    Registered
    Join Date
    Jan 2010
    Posts
    1

    Controller

    Hi Peter,

    What type of Unidex controller would this AS32020 plug into? U511?

    Nico

Similar Threads

  1. Hurco Fet Servo amps
    By DonnieET in forum HURCO
    Replies: 1
    Last Post: 01-27-2009, 05:14 AM
  2. Cleaning Fanuc Power supplies, Servo amps?
    By FanucIssues in forum Fanuc
    Replies: 4
    Last Post: 06-07-2007, 08:43 PM
  3. Wanted A/C servo amps & motors
    By Bap in forum Servo Motors / Drives
    Replies: 1
    Last Post: 05-13-2007, 06:23 PM
  4. older Brush Servo amps
    By miljnor in forum Haas Mills
    Replies: 2
    Last Post: 02-19-2006, 04:06 AM
  5. DC servo amps
    By converterk in forum CamSoft Products
    Replies: 1
    Last Post: 12-22-2003, 06:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •