584,830 active members*
5,933 visitors online*
Register for free
Login
Results 1 to 7 of 7
  1. #1
    Join Date
    Sep 2009
    Posts
    91

    MORI SEIKI SL1

    I have a Mori Seiki SL1 lathe with Fanuc 11TE control.We used the machine without a barfeeder and we want to use now with barfeeder.But now we have problem with chuck.Chuck only clamp(M10) but don't want to unclamp(M11) the piece.Before we buy the machine,she was feed by robot hand.Can someone help me?????

  2. #2
    Join Date
    Feb 2006
    Posts
    992
    Did you check and see if the foot unclamp option is on. I never saw SL1 but I used to run a NL2500Y so assume this machine have same interface, if it is similar it should be it.
    The best way to learn is trial error.

  3. #3
    Join Date
    Sep 2009
    Posts
    91

    mori

    where can i check this option? In parameters?

  4. #4
    Join Date
    Jun 2009
    Posts
    28
    Are you making sure the spindle is stopped before giving the M11 command? If I'm not mistaking there is a command that links the machine to the bar feeder and with out the command it will not work as intended.

  5. #5
    Join Date
    Feb 2006
    Posts
    992
    Quote Originally Posted by tano View Post
    where can i check this option? In parameters?
    Keep press NEXT(arrow softkey).
    The best way to learn is trial error.

  6. #6
    Join Date
    Sep 2009
    Posts
    91

    mori

    Quote Originally Posted by newtexas2006 View Post
    Keep press NEXT(arrow softkey).
    Can you be more precise please?

  7. #7
    Join Date
    Sep 2009
    Posts
    91

    mori

    Thanks for your help guys.The problem was when machine is in MDI chuck not clamp but in AUTO mode there is no problem.Who knows :-))))

Similar Threads

  1. Did Mori Seiki Buy Hitachi Seiki?
    By Billet Sean in forum Mori Seiki lathes
    Replies: 6
    Last Post: 05-05-2011, 04:12 AM
  2. Mori Seiki Sv-503
    By mr-seiki in forum Servo Motors / Drives
    Replies: 2
    Last Post: 06-04-2010, 02:52 AM
  3. mori seiki?
    By manuelc149 in forum Uncategorised MetalWorking Machines
    Replies: 10
    Last Post: 10-25-2007, 12:15 AM
  4. Mori Seiki SL-204
    By dcworld in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 07-28-2007, 04:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •