584,860 active members*
5,322 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > Ncstudio Upgraded Version V5.5.60 (ENGLISH)
Page 1 of 2 12
Results 1 to 20 of 28
  1. #1
    Join Date
    Nov 2009
    Posts
    314

    Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Hi all,

    I received the same requests for this Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version,
    So if your machine has the same problem with below friend's, please go for download this Software in attachement.

    Softare Name:Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Wish this will help you!

    Regards
    [email protected]
    [email protected]
    www.xyz-tech.com
    http://cid-2c112863b5a081a5.skydrive...SH%20Setup.rar
    --------------------------------------------------------------------------

    hello

    i have here now a cnc router from china
    but it is not working.
    i have install the software from nc studio i think at the good way.
    I installed the software and it found the pci card correctly.

    I turned on the cnc and then opened the ncstudio software, once i did that the X-Y-Z Axis started to move by them selfs.

    when they reached the limit switch's they still continued and started to make a grinding noise so i tund off the main power to the cnc.

    when i looked at the software it had an error "limit switch on".

    so i think i have bad version of ncstudio

    please help me with this

    thanks

    andre

  2. #2
    Join Date
    Jul 2008
    Posts
    4
    Quote Originally Posted by EXLASer View Post
    Hi all,

    I received the same requests for this Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version,
    So if your machine has the same problem with below friend's, please go for download this Software in attachement.

    Softare Name:Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Wish this will help you!

    Regards
    [email protected]
    [email protected]
    CNC Router Laser Cutting Machine CNC Engraving Machine-XYZ Technologies Limited
    Welcome to Windows Live
    --------------------------------------------------------------------------

    hello

    i have here now a cnc router from china
    but it is not working.
    i have install the software from nc studio i think at the good way.
    I installed the software and it found the pci card correctly.

    I turned on the cnc and then opened the ncstudio software, once i did that the X-Y-Z Axis started to move by them selfs.

    when they reached the limit switch's they still continued and started to make a grinding noise so i tund off the main power to the cnc.

    when i looked at the software it had an error "limit switch on".

    so i think i have bad version of ncstudio

    please help me with this

    thanks

    andre


    hi,
    Could you please email me a copy of Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version

    jalal aw
    [email protected]

    thanks

  3. #3
    Join Date
    Nov 2009
    Posts
    314

    Software HAD sent you,pls check!

    jalal aw,
    I had sent Ncstudio5.4 to your eamil
    [email protected],pls kindly check and installed.
    Wish this help you,
    Mike
    [email protected]
    CNC Router Laser Cutting Machine CNC Engraving Machine-XYZ Technologies Limited

  4. #4
    Join Date
    Aug 2011
    Posts
    22
    can anyone tell me where to download the latest version of ncstudio please?

    zac

  5. #5
    Join Date
    May 2012
    Posts
    0
    hi, i have the same problem so i tried to instal nc studio 5.560 but it crashed due to a bug. if any one knows a fix i would be very gratefull.
    kornelius

  6. #6
    Hi Andre,

    Does your cnc wood router is with limit switch?
    Amanda Cheung from OMNI, www.omni-cnc.com,
    [email protected], Skype: omni-cnc

  7. #7
    Join Date
    Aug 2012
    Posts
    0

    Z X Y

    I had the same problem, i install the program and open it i try to engrave some works the spindle work but the Z X Y don't work the head don't move to x , y or z

    so pleae help me i am waiting for your reply

  8. #8
    Join Date
    Jul 2008
    Posts
    11

    NC Studio

    My pc just died in the middle of a new job, I just tried to reload NC studio to find the disk is corrupted, does anyone know if there is a download for this software anywhere
    Thanks

  9. #9
    Join Date
    Jul 2007
    Posts
    1
    hi you can send me the ncstudio please, [email protected], thanks

  10. #10
    Join Date
    May 2013
    Posts
    5
    does anyone still have a link for the latest version of NC studio. I can't find one anywhere

  11. #11
    Join Date
    Mar 2013
    Posts
    82
    Hi hazelelectronic.

    I have version 5.5.6. It recently came with my cnc. I've found its as 'buggy' as v5.5.4. All error messages come up in hieroglyphics etc...

    Anyone have a newer or better version?


    Www.mostynindustries.com.au
    Cafe Racer and Custom Bike Builds

  12. #12
    Join Date
    Apr 2014
    Posts
    4

    Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    hi, i have the same problem, machine don't feel swicth limit and when open nc studio, it go on right without stop. do you think that make upgrade v5.60 slove my problem. may i have it? thanks.

  13. #13
    Join Date
    Mar 2013
    Posts
    82

    Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    To be honest I gave up on 5.5.6. The English version of 5.5.4 isn't perfect either but one thing it does at least drill correctly in sequence.


    Sent from my iPad using Tapatalk

  14. #14
    Join Date
    Apr 2014
    Posts
    4

    Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    hi raf, thanks for your answer, today, i'll try to install v.5.5.6, but i don't know is it a right version, where do you download this version??

  15. #15

    Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Dear all,

    This is Engineer Charles from Weihong, manufacturer of Ncstudio.

    As an official advice, Ncstudio V5 is 10 years old version and not stable.
    Please take a look at Ncstudio V8,V9,V10,V12, they are much more better.
    https://www.dropbox.com/s/mzrou1mmqh...6A_std_ex7.exe
    https://www.dropbox.com/sh/qt39zlgbhqlet7g/OIFbMZVkrH

    Any question about Ncstudio, warmly welcome to contact me
    Gmail: [email protected]
    Skype: charles.weihong


    Best Regards

  16. #16
    Join Date
    Apr 2014
    Posts
    4

    Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    dear charles, may you post some link to dowload some new version of nc studio more stable to begin to use this software??thank you very much

  17. #17

    Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Dear arny,

    Enclosed is demo ncstudio V8, running on WinXP or Win7 32bit, please take a look.
    https://www.dropbox.com/s/mzrou1mmqh...6A_std_ex7.exe


    Best Regards

  18. #18
    Join Date
    Apr 2014
    Posts
    4

    Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    hi, thanks, but link don't go

  19. #19

    Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)


  20. #20
    Join Date
    Aug 2007
    Posts
    75

    Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Hi Charles ,

    Do you have a demo for plasma/laser cutter also .? like the one on the picture.

    Attachment 252924

Page 1 of 2 12

Similar Threads

  1. Which version of Windows will NCStudio work on?
    By Dbl_Tap in forum Chinese Machines
    Replies: 11
    Last Post: 07-07-2021, 08:35 PM
  2. EnRoute Software Now Upgraded to Version 5!
    By MultiCam Canada in forum News Announcements
    Replies: 0
    Last Post: 11-30-2012, 06:35 PM
  3. Replies: 0
    Last Post: 04-10-2012, 07:51 PM
  4. CNC Seron-1325 and NcStudio AD version 5.4.53 Engraving Software
    By clarenceassey in forum Chinese Machines
    Replies: 0
    Last Post: 04-10-2012, 07:45 PM
  5. English manuals for Type3 and NCStudio please
    By andus in forum Chinese Machines
    Replies: 13
    Last Post: 11-19-2011, 01:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •