530,255 active members*
2,179 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    Jan 2010
    Posts
    2

    Maho 600 c rotary table

    Hello !

    Im new here, so hello to everyone!

    Recently I bought used cnc machine maho 600 c.
    The problem is that the rotary table (B-axis) doesnt work correctly.
    When you want to turn the table for some amount of degrees, he turns and then suddenly stops before than he should and all the motors turn of.
    On the screen says : "B 04 Max. following error too large".

    I think that the constants for B-axis (N 350- N 400) are not correct.

    So if anyone has this machine and can send me those constants, I would be very thankfull.

  2. #2
    Registered
    Join Date
    Jan 2008
    Posts
    124
    Make sure the "b" axis clamping cylinders are releasing. check if there is any mechanical binding. check that the "b" axis motor is secure and the mounting bolts of the motor thightened.

  3. #3
    Registered
    Join Date
    Mar 2007
    Posts
    64
    it could be a constants problem or an encoder or the cable between the encoder and the drive. i'm attaching a list of constants from a 500C with a rotary axis.
    I also attached a list from an 800C. Hope it helps, if not shout
    Attached Files Attached Files

  4. #4
    Registered
    Join Date
    Jan 2010
    Posts
    2
    Thanks for help !

    We will try with these constants.

  5. #5

    Join Date
    May 2020
    Posts
    1

    Re: Maho 600 c rotary table

    Need help please
    I have maho 800 e2

    The problem is that the rotary table (A-axis) doesnt work correctly.
    When you want to turn the table for some amount of degrees, he turns and then suddenly stops before than he should and all the motors turn of.
    On the screen says : "A 09 Max. following error too large".


    Is any one know why

Similar Threads

  1. Adding a rotary encoder to a large Rotary Table
    By small.planes in forum Mechanical Calculations/Engineering Design
    Replies: 14
    Last Post: 04-27-2012, 07:27 PM
  2. maho 1000C. maximum weight on table
    By shay z in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 1
    Last Post: 04-14-2009, 01:51 AM
  3. Need help deckel maho dmc 160u with rotary table
    By dr1 in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 01-25-2009, 08:05 PM
  4. Help with rotary table
    By woodsnskins in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 12-18-2008, 11:58 AM
  5. 60$ rotary table?
    By vacpress in forum Uncategorised MetalWorking Machines
    Replies: 22
    Last Post: 10-30-2007, 01:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •