584,817 active members*
4,675 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2003
    Posts
    189

    peck drilling?

    I've been using the G81 drill routine for drilling with great success.

    Yesterday I decided a peck routing would be better suited but I can't seem to figure out how to put the info in correctly.

    Can someone give me the correct values for example if I want to drill a hole(s) 1 inch deep in .25 increments?

    Thanks!

    Tristar500
    Is a sentance fragment?

  2. #2
    Join Date
    May 2007
    Posts
    781
    For a full retract peck.
    G83Z-1.000R0.050Q0.250F2.4

    For a chip break, if the control does it.
    G73Z-1.000R0.050Q0.250F2.4

Similar Threads

  1. Peck drilling on a 16/18i?
    By TheMoose in forum Fanuc
    Replies: 24
    Last Post: 09-09-2008, 09:34 PM
  2. Peck Drilling Help
    By soonervols in forum G-Code Programing
    Replies: 15
    Last Post: 06-09-2008, 12:26 PM
  3. v22 peck drilling
    By 68sixspeed in forum BobCad-Cam
    Replies: 7
    Last Post: 04-03-2008, 10:17 PM
  4. Peck Drilling
    By RBrandes in forum Haas Mills
    Replies: 10
    Last Post: 06-19-2007, 01:03 AM
  5. Peck drilling
    By LarryMiran in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 10-23-2004, 11:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •