584,812 active members*
5,349 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2007
    Posts
    9

    Gerber Dimension 200

    Just got an older Dimension 200 with Omega 2.5 and ArtPath but having problems with the Z holding its depth. I set the cut depth maximum to .25 and after about 45 seconds into the job, it starts diving to around .5 or .75.

    Can anyone help?

    Thanks,
    teemac

  2. #2
    Join Date
    Apr 2007
    Posts
    35
    Upgrade the software, Had the same problem with Advantage 4.1. went to Omega and that cured it.

Similar Threads

  1. G & M Code on a Gerber Dimension 200
    By quaturbo in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 06-16-2012, 01:15 AM
  2. Tool holder dimension parameters?
    By MichaelHenry in forum SprutCAM
    Replies: 5
    Last Post: 12-23-2006, 09:43 AM
  3. dyna 2800 dimension
    By ataxy in forum Benchtop Machines
    Replies: 0
    Last Post: 10-21-2006, 10:40 PM
  4. Changing object dimension
    By JRoque in forum Rhino 3D
    Replies: 6
    Last Post: 05-25-2006, 02:52 PM
  5. Cutter dimension dilema
    By Moondog in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 04-28-2006, 02:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •