I used calculated note frequency for the feedrate value.
Listen my cnc music. Also X and Z axis dansing.
http://bikomak.com/Avi/muzik.wmv
I used calculated note frequency for the feedrate value.
Listen my cnc music. Also X and Z axis dansing.
http://bikomak.com/Avi/muzik.wmv
That's pretty cool!
Sounds a bit like a violin...
Here is some info on how to make music with the stepper motors on a CNC machine.
http://www.cnczone.com/forums/showth...1348&page=2#17