[LaysMachinist]

I have an old Bullard VTL retrofitted with a Siemens 802C controller. Siemens says my ECU is going out, but due to how old it is, it is becoming difficult to find. I am wondering if anybody has or knows where to find parts for these. I have found some on ebay but I am looking for a much better price for most likely a used one. The part number is 1P 6FC5510-0BA11-0AA0 if that helps anyone.

[Brian Polley]

Did you find one? They are rare and the only one I have seen is also on e bay. At some point the control might have to be replaced. I have access to a retrofitter if you are interested. 250-768-8108

[FAHJ]

I have an old Bullard VTL retrofitted with a Siemens 802C controller. Siemens says my ECU is going out, but due to how old it is, it is becoming difficult to find. I am wondering if anybody has or knows where to find parts for these. I have found some on ebay but I am looking for a much better price for most likely a used one. The part number is 1P 6FC5510-0BA11-0AA0 if that helps anyone.

i dont know still you take it or not but i can give you

[Veiko]

Hi

I'm looking for new controller. You've been used sinumerik. What is your experience? My eyes still on Mitsubishi V70.

[FAHJ]

Hi

I'm looking for new controller. You've been used sinumerik. What is your experience? My eyes still on Mitsubishi V70.

hi

the sinumerik 802c bace line is very good system. i had working to this system for a 5 years ago and installing it on 15 unit cnc milling and turning machines all them is correctly are working .but recently siemens stop produce it.but i searching new system to exchange it please informed me.
how your think about eta17 cnc control system?

[Veiko]

Hi

Thank You Fahj for reply
Why not continue with Sinumerik, they have a newer versions 810i for example.

[802DSpecialist]

We sell and support the Siemens 802C analog control and 802D SL digital control.
Please contact me if you need to buy one.