[Calico]

anyone can suggest me ?
can I build one ? any schematic diagram ? or just buy kits ?

rud

[cncadmin]

http://www.cnczone.com/forums/bannerlist.php?cn=137

[Calico]

that's very straightforward ... thanks
I assume it's the best price and quality.
thanks again, just little problem, I don't have paypal, but I'm waiting their respond

regards
rud

[cncadmin]

I just got everyboard they sell, and I'm very pleased with them.

[JFettig]

I am using one of these boards and so far I am also pleased with it. The only thing that really isnt much of a problem, but would be nice if different, the size. The mounting holes could be a tad bigger for 6-32 screws that are typical.

Jon

[kong]

Just one thing worries me abou that board - it states max input frequency of 27Khz, so I take it if I am running Mach2 at a higher rate then the signals would be lost, true or not?

[turmite]

Paul I hope you forgive me since this guy is not an advertiser. The sound Logic board is designed specifically for mach2/3 depending on which one you get. It has all the bells and whistles. I don't know the price.

You can take a look at www.campbelldesigns.com

Mike

[Calico]

Kong,
I would like to know that answer also.
good point.


rud

[Dan Mauch]

anyone can suggest me ?
can I build one ? any schematic diagram ? or just buy kits ?

rud

I sell alow cost db25 breakout board that connects your pc to the geckos. The board has two terminal blocks for 12 connections. I use them myself on my 3/4 axis stepper and servo systems. Only $30 plus s/h
Dan

Camtronics Inc
www.camtronics-cnc.com

[kong]

Hey Dan, like the updated website, but the picture of the breakout board in the servos section looks remarkably like a stepper driver. Am I getting confused here? If not, give me a postage quote for priority airmail to the UK please!