[GR40BRUCE]

Oi-Tb HYUNDAI KIA SKT21LMS when it selects a live tool, makes the tool change, and comes to the G97 Sxxx M13 block, machine acts like M1 is active. It stops and the start button must be pushed. It only does it after a change to a live tool. Multiple ops with the same live tool it will complete the op, stop the tool, return the turret and perform the next op without an issue. This may be some sort of safety after a live tool change, but when doing a bar fed run of parts that have 3 or 4 different live tool ops its pretty inconvenient as it won't run unattended. Does anybody know a code, or the parameter that may need changing, to let the machine continue without the start button being pushed? See Code below.



Fixed tool first:

N3(POCKET CENTER DRILL 2)
G0 G53 B0. (SUB SPINDLE RETURN)
G28 U0.
G28 W0.
G54
G99 M40
T0505
G97 S3200 M3
G0 Z0.62
X0.
M8
G80
G0 Z0.22
G83 Z-1.404 R-0.02 F0.007
G80
G0 Z0.62
M9
G28 U0.
G28 W0.
M1


CHANGE TO LIVE TOOL

N4(LUBE HOLE DRILL1 5)
G0 G53 B0. (SUB SPINDLE RETURN)
G28 U0.
G28 W0.
M111
G54
G98 M43
G0 G28 H0.
T1212
G97 S3000 M13 MACHINE STOPS HERE, START BUTTON MUST BE PUSHED
G0 C90.
G0 Z-0.6845
X3.7
M8
G0 X2.9
G87 X1.3393 R-0.1289 F11.459
G80
G0 X3.7

[GR40BRUCE]

25 views and no reponses. Come on guys, any suggestions at all?