I have this problem of now knowing how to lower the rpm of the spindle when the toolpath slows down (ex corners)
I need this feature because as i cut aluminium composit panel, when the feed rate gets lower (like in corners), the spindle keeps the same high rpm and the plastic mets, leaving me with lots of parts cleaning afterwards.
If I decrease the rpm in general, on the straight line the spindle makes unproper cuts, if i lower the general feed rate the machine time increases a lot (i run at 40m/min)
My question is how would be best to approache the problem. My thoughts are that this can be achieves through a CAM software (maybe fusion 360) and not through the cnc controller(delta nc300) parameters.

If you know a software that does this, i am considering buying it as it will help me a lot in cutting production tines

Thank you