Troubleshooting ideas:
1. In MDI mode, set parameter P11549#0=1, and the system will automatically change to 0. After the power is turned off and restarted, the value is automatically entered in parameter P2557 or P4657 and the setting is successful.

2. If automatic setting cannot be performed, please set P2557 or P4657 manually. The setting method is that if the servo amplifier is close to the power module, please set P2557, and if it is the spindle module, set P4657 (bisvsp integrated amplifier P4657 setting 1).
Reprint this article and share it with everyone