[kappa_ii]

Hello.
I have a tongtai 510t cnc with fanuc oi MC controller and a lose sram data ,i don't have beckup files. How, or where I can find them ?!
I have some paper in the machine manual with written parrameter. They are of any help?
Can you please help me with some information?!
Thanks

[guhl]

Input parameters by hand
Or ask your MTB to give you backup

[kappa_ii]

Input parameters by hand
Or ask your MTB to give you backup

Thank you. Can you please tell me how can I input them manually?

[guhl]

See chapter 2 "Setting from MDI" in the manual B-64120EN_01

[zavateandu]

Hello.
I have a tongtai 510t cnc with fanuc oi MC controller and a lose sram data ,i don't have beckup files. How, or where I can find them ?!
I have some paper in the machine manual with written parrameter. They are of any help?
Can you please help me with some information?!
Thanks

Hi
can you share with me the papers with parameters you have?
i will help you to enetr manually the parameter
send to [email protected]

[guhl]

Hi
can you share with me the papers with parameters you have?
i will help you to enetr manually the parameter
send to [email protected]

Secret method? Share with us, please.

[kappa_ii]

The exact model of the machine is
TMV-510T
type oi-mc

i make some photo for the parameter .

what is the parameter for sram and how can i write them manualy ?!
Thanks

[guhl]

The exact model of the machine is
TMV-510T
type oi-mc

i make some photo for the parameter .

what is the parameter for sram and how can i write them manualy ?!
Thanks

Sram - is the binary image of the controller and when you do backup it being saved like srambak.001 file

[kappa_ii]

All ok after putting all the parameter manually. Thanks