We have bought a Synrad CO2 laser 48-1, 30 watt, manufactured 2008.
The previous owner had a UC-2000 controller to the laser.
We want to use the laser without the UC-2000 controller, and have mounted jumpers to the DB9 port according to user manual.
We have measured that the electricity is all fine through PSU and into the laser, but the laser will still not activate.
As we read in the user manual, we have to make a ticle signal to the laser, but the information about this tickle signal is some limited for us to understand.
So now is the question about we have to make this tickle signal each time to activate the laser, and if so, how and where do we make this tickle signal?
Do we need a tool/device to apply this tickle signal, and if so, where do we connect it?
Hope you can assist us with this issue. Thanks in advance!