556,800 active members*
2,376 visitors online*
Register for free
Login
Results 1 to 7 of 7
  1. #1
    Registered
    Join Date
    Jul 2009
    Posts
    35

    Unhappy Takisawa TC-10 Fanuc 21TB

    Hey guys

    Hope someone can help.

    I am still searching the forum, but....

    I bought a TC-10 that has been standing around two years.The IO board is missing, but it looks as if that one is sorted.

    The machine is still standing on a trailer, to be offloaded, but my grimy little hands could not resist to start tinkering. What I have seen so far is some slight wiring problems on the MTB side (footswitch wiring shorting) as well as Fanuc side (ribbon cable to CRT softkeys are damaged). Those are most probably the reasons the IO is missing in the first place. I am still going to trace through all the wiring anyways.

    If I do get the IO. What will the procedures be? Will the machine start up as normal, or will I have to install the software and parameters again?

    I also have zero paperwork on the machine I need anything that can be given: Operators manual, electric diagrams, parameter lists, ladder diagrams, 21 TB Fanuc manuals, etc, etc.

    Can anyone help?

  2. #2
    Gold Member
    Join Date
    Aug 2011
    Posts
    2517

    Re: Takisawa TC-10 Fanuc 21TB

    Fanuc 21 Connection Manuals
    Fanuc 21/210-Model B Connection Manual (Hardware) GFZ-62703EN
    Fanuc 21/210-Model B Connection Manual (Function) GFZ-62703EN-1

    Fanuc 21 Descriptions Manual
    Fanuc 21/210-Model B Descriptions Manual GFZ-62702EN

    Fanuc 21 Maintenance Manual
    Fanuc 21 Model B Maintenance Manual GFZ-62705EN

    Fanuc 21 Parameter Manual
    Fanuc 21/210-Model B Parameter Manual GFZ-62710EN

    Fanuc 21 Lathe Operator's Manual
    Fanuc 21–TB/210–TB Operator’s Manual GFZ-62534E

    Fanuc 21 Mill Operator's Manual
    Fanuc 21–MB/210–MB Machining Center Operator’s Manual GFZ-62704EN

    This is the full set of Fanuc 21 manuals...... found with a simple 5 second google search.......

  3. #3
    Registered
    Join Date
    Jul 2009
    Posts
    35

    Re: Takisawa TC-10 Fanuc 21TB

    Hi Forda, thanks. I found the Fanuc manuals as well after posting on a CNC specific forum. The Takisawa manuals are elusive though. I will search some more tonight.

    Thanks again.

  4. #4
    Gold Member
    Join Date
    Aug 2011
    Posts
    2517

    Re: Takisawa TC-10 Fanuc 21TB

    you wont find Takisawa pdf manuals online they are not available. in fact almost no machine manufacturer manuals are online.

  5. #5
    Member
    Join Date
    Oct 2018
    Posts
    2
    I am in need of takisawa tc10 fanuc 21T backup.

  6. #6
    Registered
    Join Date
    Jul 2009
    Posts
    35

    Re: Takisawa TC-10 Fanuc 21TB

    Hi smmoorthieee. I have a full control to part out. I have retrofitted to Linuxcnc. Don't know where you are, but I am in South Africa.

  7. #7
    Member
    Join Date
    Jun 2022
    Posts
    1

    Re: Takisawa TC-10 Fanuc 21TB

    Hello
    I need setting parameter for takisawa TC-10 fanuc 21TB, any one can help me to copy setting parameter

Similar Threads

  1. Harisson self learning lathe with fanuc 21TB
    By tmbruno28 in forum Fanuc
    Replies: 2
    Last Post: 01-26-2014, 04:10 PM
  2. Post for Daewoo w/Fanuc 21TB
    By ProgSol in forum Surfcam
    Replies: 0
    Last Post: 03-11-2011, 10:05 PM
  3. Problem with G02/G03 on Fanuc 21tb
    By dj_deadman666 in forum Fanuc
    Replies: 8
    Last Post: 04-16-2010, 08:29 AM
  4. Takisawa TC-1 with Fanuc OT
    By Nilesh Patel in forum Fanuc
    Replies: 2
    Last Post: 10-23-2008, 07:13 AM
  5. Takisawa/Fanuc 3T
    By hammerdown in forum Fanuc
    Replies: 0
    Last Post: 10-17-2008, 03:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •