562,543 active members*
3,850 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > To Okuma Corporation
Results 1 to 10 of 10
  1. #1
    Registered
    Join Date
    Oct 2009
    Posts
    106

    To Okuma Corporation

    Hello

    The pulse handle system in double columns is not. useful. Cable is short and pendant arm very heavy. A remote control pulse handle with a 5 inch
    screen would be better. Of course CE regulations will change. Regulations also should be changed. It is not a boarder.

  2. #2
    Member
    Join Date
    Jun 2015
    Posts
    3801

    Re: To Okuma Corporation

    hy is it worth it, if you replace it with a longer cable ? what table size is your mcr ?

    on your phone, you could use an app that shows osp screen; some persons use a tablet ( because it has a bigger scrren ), that is conected via teamviewer

    you could also consider a case for it, so to protect it from chips

    if you wish to go remote, then you can configure an app on the osp, that takes input from tablet, via teamviewer, and passes it to the controller; api, or without it

    if you wish, i can help you / kindly
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

  3. #3
    Registered
    Join Date
    Mar 2009
    Posts
    1720

    Re: To Okuma Corporation

    Thank you for valuable input, Mr. MCR-B II. I guess, you are new to this field.
    Okuma will drop the design philosophy and follow your advice instantly. The old machines will be retrofited. Is that OK with you?

  4. #4
    Registered
    Join Date
    Oct 2009
    Posts
    106

    Re: To Okuma Corporation

    Quote Originally Posted by deadlykitten View Post
    hy is it worth it, if you replace it with a longer cable ? what table size is your mcr ?

    on your phone, you could use an app that shows osp screen; some persons use a tablet ( because it has a bigger scrren ), that is conected via teamviewer

    you could also consider a case for it, so to protect it from chips

    if you wish to go remote, then you can configure an app on the osp, that takes input from tablet, via teamviewer, and passes it to the controller; api, or without it

    if you wish, i can help you / kindly
    Thank you for your reply.

    Table sizes from 3 meter to 8 meter.. But who prepares remote api app.. Is there an app. for okuma.

    kindly

  5. #5
    Member
    Join Date
    Jun 2015
    Posts
    3801

    Re: To Okuma Corporation

    no, there is no app for that, but i can try to help you is your osp windows based ? do you have io monitor ?
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

  6. #6
    Registered
    Join Date
    Oct 2009
    Posts
    106

    Re: To Okuma Corporation

    Quote Originally Posted by deadlykitten View Post
    no, there is no app for that, but i can try to help you is your osp windows based ? do you have io monitor ?
    Yes Windows 10 io monitor yes

  7. #7
    Member
    Join Date
    Jun 2015
    Posts
    3801

    Re: To Okuma Corporation

    okey please check your private message
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

  8. #8
    Registered
    Join Date
    Aug 2007
    Posts
    80

    Re: To Okuma Corporation

    If you have a schema or the ability to probe the signals from your remote dongle. A spliced in remote device could be made that directly manipulates the signals in parallell with the current pulse remote.
    This can be made with a cheap Arm M0 and a small Point to point sender / receiver of "some sort".. bluetooth or radio or IR..

    PM me if you wanna discuss this route - i can make it prob. but will need some more info.

  9. #9
    Registered
    Join Date
    Oct 2009
    Posts
    106

    Re: To Okuma Corporation

    Again To Okuma corporation

    This two pdf pages : Oil recomendation : Which is correct Attachment 485330Attachment 485330

  10. #10
    Member
    Join Date
    Jun 2015
    Posts
    3801

    Re: To Okuma Corporation

    those are different, because only 2nd is heavy-duty
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

Similar Threads

  1. From Syil Machine Corporation !
    By syil in forum Syil Products
    Replies: 10
    Last Post: 03-18-2018, 07:41 PM
  2. Ebtec Corporation
    By bamalam12 in forum News Announcements
    Replies: 0
    Last Post: 07-18-2011, 05:59 PM
  3. Corporation Thanking Letter
    By HAO MAU in forum News Announcements
    Replies: 0
    Last Post: 03-10-2010, 02:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •