547,432 active members*
2,160 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Transfer programs from laptop to Daewoo Lynx 200L
Results 1 to 6 of 6
  1. #1
    Registered
    Join Date
    Aug 2007
    Posts
    12

    Transfer programs from laptop to Daewoo Lynx 200L

    We have a Lynx 200 L and would like to transfer programs from a laptop to the machine. We have always programmed at the machine and nobody in the shop has experience transferring this data. Can anybody help us with a step by step guide through the process.

    Thanks in advance for any help.

    Darrell

  2. #2
    Registered
    Join Date
    Jul 2007
    Posts
    42

    Re: Transfer programs from laptop to Daewoo Lynx 200L

    You need to make your own cable to start with. If i]the machine has a RS232 connector then it's relatively simple, buy some RS232 and DB9 connectors because it's your first time I imagine. Also get a DB9 to USB lead and then start soldering. You will need a DNC program to handle the data transfer, there are a few free options. Figure out your data transfer parameters, baud rate, handshake, parity etc and bingo!. Yeah it is fun to learn, I learned the hard way. Plenty of info online though, good luck!

  3. #3
    Registered
    Join Date
    Aug 2007
    Posts
    12
    Quote Originally Posted by jimmyjolly View Post
    You need to make your own cable to start with. If i]the machine has a RS232 connector then it's relatively simple, buy some RS232 and DB9 connectors because it's your first time I imagine. Also get a DB9 to USB lead and then start soldering. You will need a DNC program to handle the data transfer, there are a few free options. Figure out your data transfer parameters, baud rate, handshake, parity etc and bingo!. Yeah it is fun to learn, I learned the hard way. Plenty of info online though, good luck!
    Thanks for the info Jimmy. Will give it a whirl.

  4. #4
    Registered
    Join Date
    Dec 2012
    Posts
    373

    Re: Transfer programs from laptop to Daewoo Lynx 200L

    Hi darrellx,

    If your Lynx has an Ethernet connector you could use the Fanuc - [ Program Transfer Tool ], it's a very cheap ( around 25 dollar ) software that transfer programs Up and Down to your PC - CNC.
    There's a video on the Fanuc Europe YouTube channel: Transfer programs with the Program Transfer Tool.
    Probably you need a [ CAT-Crossover cable ] for a direct connection between PC and CNC, not the normal CAT-cable via a router.

  5. #5
    Registered
    Join Date
    Aug 2007
    Posts
    12

    Re: Transfer programs from laptop to Daewoo Lynx 200L

    Hey Heavy Metal:

    Thank you for your reply. We will give it a whirl.

    Darrell

  6. #6
    Registered
    Join Date
    Aug 2007
    Posts
    12

    Re: Transfer programs from laptop to Daewoo Lynx 200L

    Hey Jimmy:

    Thank you for your reply. Will give it a whirl.

    Darrell

Similar Threads

  1. Can't remove draw tube Daewoo Lynx 200L
    By darrellx in forum Daewoo/Doosan
    Replies: 7
    Last Post: 09-24-2021, 04:25 AM
  2. lynx 200l operators manual
    By sky1 in forum Daewoo/Doosan
    Replies: 4
    Last Post: 08-02-2009, 11:11 PM
  3. Lynx 200L Programming Question
    By wganders in forum Daewoo/Doosan
    Replies: 1
    Last Post: 06-03-2009, 02:27 AM
  4. lynx 200l lathe
    By Hennessy in forum Daewoo/Doosan
    Replies: 6
    Last Post: 02-19-2009, 01:09 PM
  5. What programs do you use to transfer from laptop to lathe. Mazatrol--->ISO
    By FanucIssues in forum Mazak, Mitsubishi, Mazatrol
    Replies: 3
    Last Post: 04-11-2008, 01:19 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •