Asking for help to establish spindle connections and speed functionality between a Wood's Inverter that drives my Perske spindle, and my UC300 ETH-UB1 running UCCNC. I'm far from equipped to know how to do this, but I'm thinking I could get it done with some help in the right direction.

My operating system is Win 7
MyTB Wood's model is XFC2005-OB
The manual is attached
The inverter / spindle combo works just fine when manually operated and that's how we have run it up to this point. The perimeters in the inverter always program as they should but I'm figuring its time to let UCCNC do the speed changes from the PC.

Thanks in advance,