547,593 active members*
2,546 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > OKK > UNKNOWN FAULT CODE
Results 1 to 8 of 8
  1. #1
    Registered
    Join Date
    Sep 2007
    Posts
    92

    UNKNOWN FAULT CODE

    hellow fellow OKK users, I got an alarm while running and can not find it in our books anywhere, it gave me PL0011 #2011 "COOLANT UNIT TROUBLED 1" I shut down and rebooted the machine the next day and so far it has run fine?? any clues are greatly appreciated because OKK would not return my phone calls

  2. #2
    Registered
    Join Date
    Jun 2006
    Posts
    25

    #2011 alarm

    Look in your electrical manual from OKK. All PLC alarms are in there. Check the filter on your oil coolant unit. It may be getting dirty.

  3. #3
    Registered
    Join Date
    Sep 2007
    Posts
    92
    thanks mitsman , filters look good, our OKK rep says it is a phase detect circuit problem so our electrician bypassed it because we know our phasing is corect and that solved the problem untill we can find a replacement component. what type of control so you have? ours is a 635 V

  4. #4
    Registered
    Join Date
    Jun 2006
    Posts
    25

    CNC Controls

    For standard Mitsubishi controls we have here at least one of the following: 5000CII, M83, M84, M85, M86, M0, L0, M300, M3, L3, C3, M2, M2A, M500, M50,C5, C6, E60, E68, M60, M64, Magic64, M65, M66, M64S, M65S, M66S, M610, M625, M635, M635V, C70, M70A, M730, M750, M720BM.

  5. #5
    Registered
    Join Date
    Sep 2007
    Posts
    92
    are you saying that you have info for the 635V ? if so I would appreciate any PDF documentation, I downloaded the basic operations and programming PDF from the mits website but any "in depth" info on this machine seems hard to come by, thanks

  6. #6
    Member
    Join Date
    May 2008
    Posts
    107
    Dear all.
    Pls. help me. I have an alarm E20 on OKK MHA300( used Meldas 84 controller) when I power on, so my machine can not start. Does any ones can help me to solved this problem.
    Thanks.

  7. #7

    Re: UNKNOWN FAULT CODE

    Dear All.

    I'm currently working on the network I/O application from Citizen. We have 3 Machines with the M-635 nc Unit. I was told that the System is not capable of connecting it to a ethernet network. I't came to my ears a couple month's ago and I don't remember from who anymore, that there is a interface card for this system from a 3rd party available. Can anybody help me out in this case.

    Thanks

    D.K.

  8. #8
    Registered
    Join Date
    Feb 2005
    Posts
    20

    Re: UNKNOWN FAULT CODE

    Hello to All Friends

    I need your help

    I have a hartford machining center, whitch work with meldas magic64.

    I need system floppys

    Meldas magic64 nc system disk 1 and 2
    Meldas magic utility disk 1 and 2
    Meldas magic meldasmagic monitor disk 1
    Meldas magic custom API library runtime disk 1 and 2
    Meldas magic64 NC data 64m disk 1

    Please help me
    If u have these floppy's please send me a soft copy

    My email. informton@yahoo.com
    Thanks in advance

Similar Threads

  1. Fanuc 11M Fault Code SR 820 DR OFF (1)
    By wemr449 in forum Fanuc
    Replies: 6
    Last Post: 04-10-2015, 08:41 PM
  2. Unknown G code
    By cnczoneguy in forum G-Code Programing
    Replies: 4
    Last Post: 10-26-2012, 05:23 AM
  3. G65... unknown G code?
    By omgtim in forum Fanuc
    Replies: 7
    Last Post: 04-19-2010, 08:46 PM
  4. Unknown g code G23 error?
    By keaton64 in forum Mach Plasma / Laser
    Replies: 3
    Last Post: 09-22-2009, 03:33 AM
  5. Fault code
    By Rufan in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 09-28-2005, 01:57 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •