541,079 active members*
3,048 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Aug 2007
    Posts
    339
    Hello

    I have written a cycle for our DMU, which I saved in a cycle folder plus the controller file and the pictures. The cycle got recognized and the G commands integrated into the list. In the dialogue modus all parameters are displayed , the mandatory ones and the ones “free of choice”!
    Only the page of the picture is black.
    And thats the problem. I tried out all formats that I know (.bmp, .jpg, .png und .svg). The simulator displays all formats, however on the machine it stays black. In what format should the pictures be produced? ( length, width, any parameters)

    Regards
    eckitch

  2. #2
    hello

    I had the same problem on the V5xx. I solved the problem by copying a picture from the Millplus
    Winshape Simu.

    Then you have the correct format, after change the name of the picture , open it with MS Paint, delete all and insert the graphic.
    Thats how I got it to work.
    What cycle did you programed?

    Regards

    Millman

  3. #3
    Member
    Join Date
    Aug 2007
    Posts
    339
    Hi Millman

    I solved the problem and all pictures can be displayed correctly. The problem was the path, the system
    device was not C – it was V:". I chose (.svg) as my format

    I created a plan cycle. I just cant like the G 792 cycle. My cycle goes in a kind of spiral. The tool always stays in the cut. And I can choose if its a plan milling cycle or stud cycle.

  4. #4
    Member
    Join Date
    Nov 2020
    Posts
    1

    Re: V600, support pictures

    I want to save my pictures in a separate locked folder in my PC. But I have no idea how to create a locked file to save data. I use to save my pictures in my drive you can check here but due to some reason I lost my gmail password and I am unable to recover my password.

  5. #5
    Member
    Join Date
    Apr 2021
    Posts
    4

    Re: V600, support pictures

    Thanks to the author for writing the post, it was quite necessary for me and liked it. I wrote a note on the resumecvservice.com about this. I will be happy if you read it and accept it. Thank you for your concern.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •