525,618 active members*
2,513 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Benchtop Machines > Taig Mills / Lathes > Which pulley wheels and belt for Consew Motor to Taig?
Results 1 to 9 of 9
  1. #1
    Registered
    Join Date
    May 2006
    Posts
    255

    Which pulley wheels and belt for Consew Motor to Taig?

    Can anybody here tell me the best option for pulley wheels and belt in order to mount a Consew CSM1000 Sewing Servo Motor to the original taig spindle block? Any links to an ebay seller or some other inexpensive dealers would have been fine.

  2. #2
    Gold Member
    Join Date
    Nov 2009
    Posts
    4407

    Re: Which pulley wheels and belt for Consew Motor to Taig?

    A lazy man does it twice.

  3. #3
    Registered
    Join Date
    Apr 2005
    Posts
    6

    Re: Which pulley wheels and belt for Consew Motor to Taig?

    Anyone have part numbers on the ones that fit?
    (closest fit)

    The link above is the index to the entire web-store.

  4. #4
    Registered
    Join Date
    Jul 2008
    Posts
    1

    Re: Which pulley wheels and belt for Consew Motor to Taig?

    Quote Originally Posted by RedHouse View Post
    Anyone have part numbers on the ones that fit?
    (closest fit)

    The link above is the index to the entire web-store.
    I have not completed boring out my pulley so I can't comment on efficacy, but I referenced this link: https://trains.socha.com/2018/11/tai...mach-mill.html

    20XL037-3FA7 Imperial Pitch Pulley -- 20 teeth, 5/8" bore
    40XL037-6A6 Imperial Pitch Pulley -- 40 teeth, 1/2" bore
    142XL037G Imperial Pitch Belt

  5. #5
    Registered
    Join Date
    Apr 2005
    Posts
    6

    Re: Which pulley wheels and belt for Consew Motor to Taig?

    :cheers:

  6. #6
    Registered
    Join Date
    May 2006
    Posts
    255

    Re: Which pulley wheels and belt for Consew Motor to Taig?

    One of the pulley is type 3F and the other type 6. What does that mean? Do you think they both will fit the same belt?

    And I see the 40xl pulley has a bore on 1/2 inch but the shaft on Consew is 15mm. Do you think this will be a better choice and fit to the belt?
    https://www.ebay.com/itm/40XL037-Alu...UAAOSwyO1asyIY

  7. #7
    Registered
    Join Date
    Apr 2005
    Posts
    6

    Re: Which pulley wheels and belt for Consew Motor to Taig?

    My Taig Mill's spindle measures 15.9mm, and a 16mm pulley fits ...but sloppy, so it wobbles when the set screws are tightened.
    (throws it off center just slightly)

    Same slop problem with the Consew, which (mine) has a shaft measuring 14.96mm and a stock 15mm pulley fits but sloppy.

    The pulleys seem to be bored slightly oversize.

    I guess I'll need to get some more pulleys, get undersize pulleys and see if I can find someone with a lathe that can/will bore them to proper fit.
    (sigh, ya, shoulda bought a lathe I guess)

  8. #8
    Registered
    Join Date
    May 2006
    Posts
    255

    Re: Which pulley wheels and belt for Consew Motor to Taig?

    Quote Originally Posted by RedHouse View Post
    My Taig Mill's spindle measures 15.9mm, and a 16mm pulley fits ...but sloppy, so it wobbles when the set screws are tightened.
    (throws it off center just slightly)

    Same slop problem with the Consew, which (mine) has a shaft measuring 14.96mm and a stock 15mm pulley fits but sloppy.

    The pulleys seem to be bored slightly oversize.

    I guess I'll need to get some more pulleys, get undersize pulleys and see if I can find someone with a lathe that can/will bore them to proper fit.
    (sigh, ya, shoulda bought a lathe I guess)
    Have you tried with a layer of scotch tape around the shaft or something similar? Maybe it will be possible to buy a thin sheet of 0.05 mm steel and use that between the shaft and the pulley.

  9. #9
    Registered
    Join Date
    Apr 2005
    Posts
    6

    Re: Which pulley wheels and belt for Consew Motor to Taig?

    Yeah that can be done and many do that,but I'd prefer to get a pulley (or modify a pulley) to fit properly without a work-around like shimming.

    I've ordered a couple more pulleys and that will take care of it.

Similar Threads

  1. Motor to Ballscrew (1605) Belt & Pulley: Height Mismatch
    By Bravin Neff in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 03-11-2019, 01:42 AM
  2. Which belt and pulley wheels for sewing machine motor?
    By jaru-eri in forum Taig Mills / Lathes
    Replies: 3
    Last Post: 09-09-2018, 07:32 AM
  3. Bridgeport CNC Quill Motor Pulley and X-axis Belt
    By glixons in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 01-15-2013, 05:26 PM
  4. Toy Motor Brass Belt Pulley
    By rwburbage in forum Employment Opportunity
    Replies: 13
    Last Post: 11-15-2012, 02:45 AM
  5. X3 Motor Pulley / Belt Pitch?
    By ImagineRobots in forum X3/SX3/G0619/G0463
    Replies: 4
    Last Post: 01-18-2012, 03:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •