Hello everyone!
I'm using router Mack3 compatible. Everything was working normally but when I started the next operation the x axis is not moving anymore. I can home, no problem. I can manually move all axes. Everything seems normal but when the programs runs it hangs on the x axis and stays in place. The weird thing is that I can see on the controller's display all the movement on the x, y and z axes.

%G90
G0Z30.
X285.Y252.5A0
S1500M3
G0Z30.
X285.Y252.5A0
G0X256.644Y445.355Z30.
Z5.
G1Z4.7F500
X285.Z-.3 > This last line hangs forever but display shows movements.
Any idea?
Thanks in advance!