521,937 active members*
1,910 visitors online*
Register for free
Login Register
Frech

Contact

Frech GmbH
Werderstrasse 82
74889 Sinsheim
Germany
+49 (0)7261-1011
+49 (0)-7261-63966

Route planner

Route planner

HELMERDING EVR 800-2150-970

Asking price


  • Reference number 1073-60057
    Manufacture Year not applicable
    Operation Hours not applicable
  • Metal working machine
  • Sheet Metalforming machines
  • Sheet-straightening machines
  • material width
    0800 mm
    material thickness
    6,00 mm
    no. of straightening rolls
    9
    sheet thickness - min.
    1,00 mm
    diam. of the rolls ca.
    70 mm
    straight. speed ca.
    15 m/ min
    total power requirement
    kW
    weight of the machine ca.
    3,50 t
    dimensions of the machine ca.
    m
  • Operating voltage: 230/400 V 50 Hz
    Control voltage: 220 V, 50 Hz, 24VGS
    Signal and relay: 24 V DC
    Solenoid valve: 24 V GS
    Pneumatics: 6 bar
    Hydraulics: 120 bar


    The following components are available:

    -Frequency converter drive feed;
    -Hydraulic unit feed / straightening machine;
    -Fast fan block Herion to control the feed and straightening rollers;

    For the control of the 2 gear motors of the feed height adjustment and for
    Feed infeed height (also 2 geared motors) becomes an additional one
    Control with PLC / motor protection switch / contactors etc. required.

    A control cabinet with Bus Terminals sits on the straightener itself, which
    then connects to the new PLC can be connected.


    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from Frech GmbH