527,824 active members*
2,296 visitors online*
Register for free
Login Register
Frech

Contact

Frech GmbH
Werderstrasse 82
74889 Sinsheim
Germany
+49 (0)7261-1011
+49 (0)-7261-63966

Route planner

Route planner

UNGERER RM 18003517

Asking price


  • Reference number 1073-60040
    Manufacture Year not applicable
    Operation Hours not applicable
  • Metal working machine
  • Sheet Metalforming machines
  • Sheet-straightening machines
  • UNGERER
  • material width
    1750 mm
    material thickness
    3,50 mm
    no. of straightening rolls
    17
    between stands ca.
    1780 mm
    thickness min. approx.
    0,50 mm
    diam. of the rolls ca.
    69,50 mm
    straight. speed ca.
    m/ min
    barrel length ca.
    1830 mm
    bronze sliding bearing
    ja / yes
    total power requirement
    18,5 kW
    weight of the machine ca.
    13,5 t
    dimensions of the machine ca.
    4,30x2,10x2,40/2,70 m
  • Equipment:
    - Electromotive infeed and electrical swiveling of the upper yoke
    - 5-fold lower support with support rollers (individually adjustable)
    - 2-fold upper support with support rollers
    - crowning below
    - Circular lubrication of transmission and cardan shafts
    - Infeed and outlet table available
    - Reversible
    - New three-phase motor 18.5 KW
    - control cabinet

    The leveller was completely disassembled, cleaned in our house,
    looked through, painted and brought back into working condition.

    The rolls are removed and polished.

    The gearbox was checked.

    A test can be done with clean material after previous appointments.

    PLEASE NOTE:

    The machine has a sword of approx. 300 mm
    and is currently standing on a steel frame.

    As now standing, work can be done immediately
    - there is an inlet height/working height of 1170 mm
    - with the machine in the foundation, the working height would be 870 mm.



    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from Frech GmbH