523,703 active members*
2,580 visitors online*
Register for free
Login Register
Fresmak Clamping Solutions Products

INNOVATION is not an option is OUR ATTITUDE since 1967

Fresmak S.A.
Chucks, others

Protecting Nipple

Product details Homepage Product request
Arnold hydraulic spindle for CLASSIC
Arnold hydraulic spindle for CLASSIC
Speed-up head
Fresmak S.A.
Chucks, others
The basis of the intensifying hydraulic spindle is that it works with a closed oil cylinder. On inserting the piston into the chamber, the pressure due to the section differences or diameters intensifies with little effort. The movement is light; this is noted on turning the handle which is also smooth. As these are hollow spindles, the force is transmitted inside the threaded spindle. Therefore this carries out only the stroke movement, and enjoys long-lasting wear as it does not have to carry out any clamping force.
Product details Homepage Product request
Arnold Mat Automat
Arnold Mat Automat
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Mat Automat
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.

- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.

- Ideal for working in horizontal and vertical machining centres.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.

- Clamping force is 25/40/50 kN, depending on the model.

- Designed to automate processes and robotize them.

- Two clamping possibilities, either towards the fixed head or the opposite direction. Normal clamping is towards the fixed head.

- Fitted with a high pressure double acting oleo-dynamic spindle, with spring push-back effect.

- 4 mm. automatic stroke for closing and opening.

- Adjustable clamping force and directly proportional to oil pressure input (see manual).
TIPS FOR USE

- Should reverse clamping be needed, just place the spindle at the rear part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
ELEMENTS NEEDED

- Hydraulic unit or double effect 70 bar pneumo-hydraulic pump with vice unit connection hose, pressure control switch, safety valve integrated into the unit and ON-OFF switch.

- Gauge.
Product details Homepage Product request
Arnold Mat Oleo-dynamic
Arnold Mat Oleo-dynamic
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Mat Oleo-dynamic
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.

- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.

- Ideal for working in horizontal and vertical machining centres.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.

- Clamping force is 25/40/50 kN, depending on the model.

- Designed to automate processes and robotize them .

- Two clamping possibilities, either towards the fixed head or in reverse direction. Normal clamping is towards the fixed head.

- Fitted with a single acting oleo-dynamic spindle, with spring push-back effect.

- Rotary connection at the inlet and the outlet for oil.

- 4 mm. automatic stroke for closing and opening.

- Adjustable clamping force and directly proportional to oil pressure input (see manual).
TIPS FOR USE

- Should reverse clamping be needed, just place the spindle at the rear part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
ELEMENTS REQUIRED

- Hydraulic unit or single acting 500 bar pneumo-hydraulic pump with vice unit connection hose, pressure control switch, safety valve integrated into the unit and ON-OFF switch.

- Pressure gauge.
Product details Homepage Product request
Arnold Mat Pneumo-Hydraulic
Arnold Mat Pneumo-Hydraulic
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Mat Pneumo-Hydraulic
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.

- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.

- Ideal for working in horizontal and vertical machining centres.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.

- Clamping force is 25/40/50 kN, depending on the model.

- Designed to automate processes and robotize them.

- Pneumo-hydraulic high pressure single acting intensifier, supplied by compressed air at 6 bars.

- Clamping force adjustable by the air pressure (see manual).

- Automatic stroke for closing and opening up to 3 mm.

- The vice operation may be manual (used with a valve unit sent with the vice) or by using a pedal situated near the machine or may be controlled by CNC by using a solenoid valve.
TIPS FOR USE

- The air must be filtered (dry air).

- Should control pedal be used, the set of valves supplied with the vice must be placed between the compressor and the pedal, not between the pedal and the vice.
ELEMENTS NEEDED

- Connection of the compressor to the vice.

- Filter unit, gauge and lubricator of the air inlet.
Product details Homepage Product request
Arnold Mat Prox
Arnold Mat Prox
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Mat Prox
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and horizontal).

- Accuracy of 0.01 mm in clamping repeatability.

- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.

- Ideal for working in horizontal and vertical machining centres.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- May be clamped to the table either by the four standard clamps supplied or by using four screws located in the body.

- Clamping force is 25/40/50 kN, depending on the model.

- Clamping towards the operator for an easier load and unload operation for heavy or oversized workpieces.

- Two clamping possibilities of the work piece, either towards the movable jaw or in reverse direction.

- The spindle operates at the rear part of the fixed vice head.

- Comes with a high pressure hydraulic intensifier.

- Angle driver for handle clearance upon request.
TIPS FOR USE

- Should reverse clamping be needed, just place the spindle at the opposite part of the fixed head, clamped by four screws. Then rotate the spindle shoe and the moveable jaw.
Product details Homepage Product request
Arnold MB2 Oleo-dynamic
Arnold MB2 Oleo-dynamic
Chuck, others
Fresmak S.A.
Chucks, others
Arnold MB2 Oleo-dynamic
High Pressure ARNOLD MB2 vices are the most flexible vices. They also maintain their constant length irrespective of the size of the workpiece.

- Accuracy of 0.01 mm in clamping repeatability.

- May be clamped to the table either by the four standard clamps supplied or by using four screws within the body.

- Suitable for working in horizontal and vertical machining centres.

- Flexible Design: All the jaws of the MB2 vices are interchangeable.

- Side windows for quick cleaning.

- Clamping force is 40/50 kN depending on the model.

- Power regulator optional.

- Angle driver for handle clearance optional.

- Split vice for clamping larger work-pieces optional.

- Designed to automate processes and robotize them.

- Fitted with a high pressure single acting oleo-dynamic spindle.

- Rotary connection at the inlet and the outlet for oil.

- 4 mm. automatic stroke for closing and opening.

- Adjustable clamping force directly proportional to the oil pressure input (see manual).
ELEMENTS REQUIRED

- Hydraulic unit or single acting 500 bar pneumo-hydraulic pump with vice unit connection hose, pressure control switch, safety valve integrated into the unit and ON-OFF switch.

- Pressure gauge.
Product details Homepage Product request
Arnold mechanical spindle for CLASSIC
Arnold mechanical spindle for CLASSIC
Speed-up head
Fresmak S.A.
Chucks, others
The intensifier system on these spindles is based on a series of elements which, as one supports the other, are able to obtain a power intensifying effect by means of a handle (not reaching 2.5kg x m). The basic principels of this system are wedge and roll. The mechanical spindle is easy to assemble and disassemble and needs practically no maintenance, as long as optimal coolant liquids are used, making it a long-lasting system like no other.
Product details Homepage Product request
Arnold Oleo-Dynamic
Arnold Oleo-Dynamic
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Oleo-Dynamic
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN.

- Accuracy of 0.01 mm in clamping repeatability.

- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.

- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.

- Large aperture up to 375 mm and 845 mm if the body is in two parts.

- Clamping force is 25/40/50/80 kN, depending on the model.

- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.

- Designed to automate processes and robotize them.

- Fitted with a single acting oleo-dynamic spindle, with spring push-back effect.

- Rotary connection at the inlet and the outlet for oil.

- Automatic stroke for closing and opening up to 4 mm.

- Adjustable clamping force and directly proportional to oil pressure input (see manual).

- Two part straight vice option upon request.

- Common features page 32.
ELEMENTS REQUIRED

- Hydraulic unit or single acting 500 bar pneumo-hydraulic pump with vice unit connection hose, pressure control switch, safety valve integrated into the unit and ON-OFF switch.

- Pressure gauge.

VERSIONS
Standard

Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight

Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.
Two part straight

Ideal for large work-pieces.

It clamps the work-pieces on top of the guides or on top of the table.

An inner tie-rod joins both parts of the vice.
Product details Homepage Product request
Arnold Pneumo-Hydraulic
Arnold Pneumo-Hydraulic
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Pneumo-Hydraulic
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN.

- Accuracy of 0.01 mm in clamping repeatability.

- Monoblock design avoids deformations due to high pressure and offers great rigidity and robustness.

- The force applied by the high pressure spindle is transmitted to the work-piece right in the centre of the clamping jaw.

- Large aperture up to 375 mm and 845 mm if the body is in two parts.

- Clamping force is 25/40/50/80 kN, depending on the model.

- ARNOLD CLASSIC spindles can be used independently from the vice as a power clamping element in a workholding set up.

- Designed to automate processes and robotize them .

- Pneumo-hydraulic high pressure single acting intensifier, supplied by compressed air at 6 bars.

- Clamping force adjustable by the air pressure (see manual).

- Automatic stroke for closing and opening up to 3 mm.

- The vice operation may be manual (used with a valve unit sent with the vice) or by using a pedal situated near the machine or may be controlled by CNC by using a solenoid valve.

- Two-parts straight vice option upon request.
TIPS FOR USE

- The air must be filtered (dry air).

- Should control pedal be used: the set of valves supplied with the vice must be placed between the compressor and the pedal, not between the pedal and the vice.
ELEMENTS NEEDED

- Connection of the compressor to the vice.

- Filter unit, gauge and lubricator of the air inlet.

VERSIONS
Standard

Clamping to the machine table can be achieved through the holes and the slots on the side of the vice.
It can be supplied with a rotary base.
Straight

Its narrowness makes it easy for it to be placed jointly parallel to another vice, thereby allowing for a large clamping unit for large workpieces.
Two part straight

Ideal for large work-pieces.

It clamps the work-pieces on top of the guides or on top of the table.

An inner tie-rod joins both parts of the vice.
Product details Homepage Product request
Arnold Twin Oleo-dynamic
Arnold Twin Oleo-dynamic
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Twin Oleo-dynamic
High pressure ARNOLD TWIN vices are capable of clamping two pieces simultaneously.

- Accuracy of 0.01 mm in clamping repeatability.

- Suitable for working in horizontal and vertical machining centres.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- Clamping force is 25/50 kN, depending on the size.

- Designed to automate processes and robotize them.

- Fitted with a high pressure single acting oleo-dynamic spindle, with spring push-back effect.

- Rotary connection at the inlet and the outlet for oil.

- Automatic stroke for closing and opening 4 mm.

- Adjustable clamping force directly proportional to the oil pressure input (see manual).
ELEMENTS REQUIRED

- Hydraulic unit or single acting 500 bar pneumo-hydraulic pump with vice unit connection hose, pressure control switch, safety valve integrated into the unit and ON-OFF switch.

- Pressure gauge.
CLAMPING POSSIBILITIES

Two workpieces can be clamped at the same time, with a difference in size of 3mm. between them or just one workpiece.
Product details Homepage Product request
Arnold Twin Pneumo-Hydraulic
Arnold Twin Pneumo-Hydraulic
Chuck, others
Fresmak S.A.
Chucks, others
Arnold Twin Pneumo-Hydraulic
High pressure ARNOLD TWIN vices are capable of clamping two pieces simultaneously.

- Accuracy of 0.01 mm in clamping repeatability.

- Suitable for working in horizontal and vertical machining centres.

- Grinding of all surfaces with a parallelism and perpendicularity of 0.02 mm.

- Possible working positions: supported on the base, on the side or on the head vertically.

- Side windows for quick cleaning of the inside of the vices.

- Clamping force is 25/50 kN, depending on the size.

- Designed to automate processes and robotize them.

- Fitted with a pneumo-hydraulic high pressure single acting intensifier, fed by compressed air at 6 bars.

- Clamping force adjustable by air pressure input (see manual).

- Automatic stroke for closing and opening up to 4 mm.

- The vice operation may be manual (used with a valve unit supplied with the vice), by using a pedal located near the machine or may be controlled by CNC using a solenoid valve.
USAGE TIPS

- The air must be filtered (dry air).

- Should the control pedal be used, the set of valves supplied with the vice must be placed between the compressor and the pedal, not between the pedal and the vice.
ELEMENTS NEEDED

- Connection of the compressor to the vice.

- Filter unit, gauge and lubricator of the air inlet.

CLAMPING POSSIBILITIES

Two workpieces can be clamped at the same time, with a difference in size of 3mm. between them or just one workpiece.
Product details Homepage Product request
Automat spindle
Automat spindle
Speed-up head
Fresmak S.A.
Chucks, others
Automat spindle
This unique model is a double effect cylinder with an internal pressure multiplier. To operate it needs to be supplied with oil at 70 bar pressure. With its interior intensifier, it transforms this initial pressure into a clamping force of 5000 kg. In addition, it automatically opens and closes to a distance of 4 mm.
These two advantages, input pressure of only 70 bar and automatic opening and closing, make this spindle ideal for use in horizontal and vertical machining centres which have an independent internal hydraulic group. In addition, it is compact and easy to use. With the handle, the moveable jaw is placed at three or four millimetres from the work-piece and then by means of a manual valve or the machine’s CNC solenoid valve, high pressure clamping can be carried out. Thanks to this, it can work with robotized processes.
Product details Homepage Product request
BLOCK-SC
BLOCK-SC
Chuck, others
Fresmak S.A.
Chucks, others
BLOCK-SC
Hydraulic static blocks reach a pressure between 16 KN and 40 KN with an infeed power of 120 bar

Stroke range of 6 and 8mm

– Double effect actinoning

– Repeatability accuracy of 0.020 mm

– Long guides

– All basic components are hardened

– Basic surfaces are ground

– Entirely compact and fully protected against chips

– Total lubrication system. Greasing channels within the base jaw and base body

– The oil supply for machining and lubrication can be performed from the sides or the base of the body

– Hydraulic supply up to 120 bar

FUNCTIONING
Hydraulically actioned wedge clamping system: the multiplication of the hydraulic force is performed by actioning the wedges. These wedges are ground in order to give rigidity and precision to the set.
Product details Homepage Product request
Clamping by adhesion F-GRIP
Clamping by adhesion F-GRIP
Chuck, others
Fresmak S.A.
Chucks, others
Clamping by adhesion F-GRIP
The F-GRIP is a clamping system based on reversible adhesion principle. The developed adhesive consists in a biphasic polymer, nano-structured with different adhesion phases controlled by temperature. The control of the temperature enables to stick and unstick all types of material with a high clamping force and without compromising the areas to be machined.
Product details Homepage Product request
Claw Serrated
Claw Serrated
Chuck, others
Fresmak S.A.
Chucks, others
Claw Serrated
Designed to achieve a more aggressive clamping
Jaws get the most out of the material
Material: Hardened steel
Product details Homepage Product request
Cylinder MAK10
Cylinder MAK10
Chuck, others
Fresmak S.A.
Chucks, others
Cylinder MAK10
Product details Homepage Product request
Cylinder MAK10 4x90º
Cylinder MAK10 4x90º
Chuck, others
Fresmak S.A.
Chucks, others
Cylinder MAK10 4x90º
Product details Homepage Product request
Cylinder MAK20
Cylinder MAK20
Chuck, others
Fresmak S.A.
Chucks, others
Cylinder MAK20
Product details Homepage Product request
Cylinder MAK20 4x90º
Cylinder MAK20 4x90º
Chuck, others
Fresmak S.A.
Chucks, others
Cylinder MAK20 4x90º
Product details Homepage Product request
Double plate MAK20 4x90º
Double plate MAK20 4x90º
Chuck, others
Fresmak S.A.
Chucks, others
Double plate MAK20 4x90º
Product details Homepage Product request
High Plain Jaw
High Plain Jaw
Chuck, others
Fresmak S.A.
Chucks, others
High Plain Jaw
Designed for clamping bigger workpieces than the height of the standard jaws.
Material: Hardened steel
Product details Homepage Product request
Hold down jaw
Hold down jaw
Chuck, others
Fresmak S.A.
Chucks, others
Hold down jaw
Designed for achieving a descendant clamping pull down jaws
Material: Steel with steel spring
Product details Homepage Product request
Hydraulic
Hydraulic
Chuck, others
Fresmak S.A.
Chucks, others
Hydraulic
Designed for clamping uneven work pieced wihout parallel faces.
They consist of pins which compensate themselves with through an oil chamber
Material: Hardened steel
Product details Homepage Product request
Inserts
Inserts
Chuck, others
Fresmak S.A.
Chucks, others
Inserts
Designed for increasing aggressiveness in clamping
It consists of interchangeable inserts
It has a step to avoid cales or parallels
Material: Hardened steel
Product details Homepage Product request
Loading ...