502,968 active members
5,744 visitors online
Register for free
Login Register
Geiger Maschinen-Vertrieb


Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
James-Watt-Str. 12
72755 Metzingen
+49 (0)7123/18040
+49 (0)7123/18384

Route planner

Route planner


Asking price

  • Reference number 1049-274199
    Manufacture Year 1988
    Operation Hours not applicable
  • Metal working machine
  • Lathes
  • Multispindle bar automatics
  • number of spindles
    spindle passage
    20 mm
    turning length
    80 mm
    total power requirement
    25 kW
    weight of the machine ca.
    6,5 t
  • Max. bar Ø, normal 20 mm
    Max. bar Ø, square, hexagonal, octagonal 14 / 17 / 18 mm
    Max. bar feed 80 mm

    Stroke of longitudinal slide 63 / 39.5 mm
    Boring depth, max. 39.6 mm
    Stroke of cross slide, max. 32 / 25 mm
    Stroke of lower cross slide 40 / 26 mm

    49 Spindle speeds 355 - 5,000 rpm
    No. of workpiece revolutions per work cycle 60 - 1.32
    35 cutting times per part 0.36 - 53 sec

    Spindle drive 20.5 kW
    Total electrical load 25 kW - 380 V - 50 Hz
    Weight, approx. 6,500 kg

    Accessories / Special Features
    * Built-on bar loading magazine for bar length up to 4,000 mm.
    * Swing-in bar stop.
    * Dnt = direct selection of spindle speed and cycle time. The machine has a separate infinitely variable feed drive for optimal adaptation (via potentiometer) of cutting speed and feed rate, which can be varied during the working process. Direct display of speeds and cycles, as well as WOERLE Display for working status and error display. Setting up the machine for a new workpiece is quick and easy.
    * Pick-up device with hydraulic clamping for for back work, which allows burr-free cut-off, with electric supervision.
    * Longitudinal slide is equipped with 5 tool holders. Side slide is not equipped with tool holders.
    * Workpiece counter. * Coolant equipment.
    * Large separate hydraulic aggregate with hydraulic pressure on spindle drum, and the possibility for connection to a copying device. Pendant control.
    * Workpiece chute for finished parts with very long conveyor belt for removal of finished parts
    * Complete machine is noise damped.

    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from Hans-Jürgen Geiger Maschinen-Vertrieb GmbH