532,213 active members*
2,799 visitors online*
Register for free
Login Register
Geiger Maschinen-Vertrieb


Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
James-Watt-Str. 12
72755 Metzingen
+49 (0)7123/18040
+49 (0)7123/18384

Route planner

Route planner


Asking price

  • Reference number 1049-710016
    Manufacture Year 1981
    Operation Hours not applicable
  • Metal working machine
  • Presses with mechanical driving
  • Open gap eccentric presses
  • pressure
    110 t
    580 mm
    100 mm
    total power requirement
    22 kW
    weight of the machine ca.
    11 t
    dimensions of the machine ca.

    Double Walled Single Column – Eccentric Press with automatic
    Decoiler and Strip-Feeder. Model OBA 110
    Year 1981, but partially reconditioned and modernized in 2010

    Pressure force 110 to

    Table clamping area 700 x 1.100 mm
    Table Bore dia. 225 mm
    Ram clamping area 600 x 450 mm
    Mortise in ram dia. 50 x 110 mm
    Mounting height max. 280 - 500 mm

    Throat 350 mm
    Distance between walls approx.. 600 mm

    Number of strokes steplessly adjustable 20 - 65 /min
    Length of strokes approx. 7 - 120 mm
    Ram adjustment 100 mm
    Travel of ejector approx. 90 mm

    Main motor 17 kW
    Total electrical load approx. 22 kW – 400 V – 50 cycles
    Weight approx. 11.000 kg
    Exterior dimensions approx. x 2950 mm high


    • This machine is a very sturdy double walled design, the ram is guided as a
    plunger for high precision and less die wear. Also available a hydraulic
    overload Protector and a hydraulic counter weight for the ram, blowing
    device, motorized height adjustment of the ram, air-operated Plexi-Glass
    protection door, foot switch, etc.
    • steplessly adjustable motor for the number of strokes.
    • SIEMENS SIMATIC PLC Control with new switch cabinet and monitor to adjust
    the cycles of the machine s.a. single stroke, continous stroke by manual or
    footswitch, set-up functions,etc.
    • Swivelling electric Two-Hand-Release unit in front of table
    • Complete sheetmetal strip decoiling and feeding device consisting of:
    Decoiler for coils 1200 Ø x 400 x 1000 kg, strip width 300 mm, pneumatic
    hold down roll,
    Mounted on the l.h. side of press: 7 roll-levelling device and a DREHER
    motorized Feeding unit Model WAV MD 2 Z / 1082 K-A, stroke length
    approx 100 mm, stripthickness 0,2 – 3 mm and with modern SIEMATIC Control
    unit for strip feed
    • automatic central lubrication, and many more.

    Condition : good to very good –
    can be inspected under power, modernized in 2010 by MAWI
    Delivery : ex stock – as inspected
    Payment : net – after completion of contract

    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from Hans-Jürgen Geiger Maschinen-Vertrieb GmbH