DUNKES HD 10

•  
  Reference number 1049-62047

  Manufacture Year 1993

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Hydraulic Presses
• Type of Machine
  Open Gap Presses
• Manufacturer
  DUNKES
• Technical data

  pressure

  10 t

  throat

  0 mm

  stroke

  400 mm

  total power requirement

  7,5 kW

  weight of the machine ca.

  6500 t

  dimensions of the machine ca.

  m

• Description
  D U N K E S (Germany)
  CNC Controlled Hydraulic Double Column Press
  Model HD 10
  Year 1993
  ________________________________________________________
  
  Pressure 10 tons
  Ram stroke 400 mm
  Mounting height 600 mm
  
  Table size 400 x 300 mm
  Table height above floor 820 mm
  Ram area 400 x 300 mm
  Ram bore 40 mm
  
  Quickspeed, downwards, max. 70 mm/s
  Working speed, downwards, using max. pressure 40 mm/s
  Working speed, min. 5 mm/s
  Working speed adjustable from 5 - 70 mm/s
  Return stroke speed, min./max. 20 / 175 mm/s
  
  Drive 7.5 kW
  Total electrical load, approx. 12 kW - 380 V - 50 Hz
  Weight, approx. 6,500 kg
  
  Accessories / Special Features
  * DUNKES CNC Control, Model 200, can be programmed with
  presettable parameters, e.g. Stroke, speed, forward and
  return motion, pressing time, etc.
  * Separate switch cabinet with floppy disk input.
  * Pendant control with monitor.
  * Two-handed release, in conjunction with pneumatic safety door.
  * A turning device for calibrating and smoothing of bores is
  mounted on the ram. (Calibrating mandrel moves into the bore
  and rotates, powered by it own motor-driven timer. Repetitions
  are controlled by stroke counter.)
  
  This ad was created with MODUL MWS - the software solution of LogoTech.
• State
  Used

I like it 0