Robotic and automation

Automation in a simple manner • minimal footprint • loading of the machine table of your milling, wire erosion, or loop system • ease of use: sliding door provides optimal access to the magazine. Achieve a higher return on investment! Small footprint! WorkPal 1 is designed for the automatic pallet changer in a Chuck on the machine table of a pallet changer with minimal floor space requirements by: • milling machines • grinders • wire erosion machines. A whole page of WorkPal 1 is equipped with a sliding door. This design provides optimal accessibility of the magazine and facilitates loading and removal of the pallets. Wire EDM: WorkPal 1 + wire erosion machines The changing arm lifts pallets over the tank in wire EDM machines. Milling: WorkPal 1 + milling machines Optional with WorkPal: plexiglass door There are no costly changes to the machines. The changing arm lifts pallets over the tank in wire EDM machines. Optional for WorkPal 1 - dry station

A partner for your production • operated one or two machines in an automated production cell • one, two or three magazines for uniquely flexible magazine capacity • large doors make loading the magazine with work pieces and tools • integrated pneumatic control grippers and table chucks • minimal floor space requirements Achieve a higher return on investment! Modular adapted to your needs: Wire EDM WorkPartner 1 + (HH version) • charging station (heavy) Milling WorkPartner 1 + (LHL-version) • high magazine capacity • two tool equipment variants • charging station (heavy) EDM WorkPartner 1 + (LH-version) • charging station (heavy) • discharge station Laser processing WorkPartner 1 + (LL-version) Combined techniques: EDM and milling WorkPartner 1 + (LH-version) • high magazine capacity • two tool versions • charging station (heavy) • discharge station Rails application for front-end-loaded machines WorkPartner 1 + (HH version) • charging station (heavy) 9 modular models! • a light magazine • two light magazine • three light magazine • a heavy magazine and a light magazine • a heavy magazine and two light magazine • a heavy magazine • two heavy-magazine • three heavy-magazine • two heavy-magazine and a light magazine WorkPartner 1 + offers optimum magazine capacity on minimal floor space. In contrast to other solutions, market standard there is a hardly risk to end up in a dead end with the WorkPartner 1 +. The modular magazine offers extremely high flexibility and can be adapted to all the needs of the user. A magazine in the basic installation can be at any time with one or two other magazines. WorkPartner 1 + is suitable both for milling and grinding machines, as well as for sinking and wire EDM machines. He can be used in the production of single piece as effectively as in series production. WorkPartner 1 + is in addition extremely easy to use and has great doors that facilitate loading. Quick change operations, integrated control grippers and table chucks, as well as the minimum floor space requirement are further decisive benefits. Modular components • manipulator unit • light magazine • heavy magazine Optional gripper • Double gripper • gripper with tilt function • grippers with pivot Option • manual operation rail: WorkPartner 1 + can push to the manual operation of front-loaded machines to the page Magazine capacity: There are two types of magazine: L (light) and H (heavy). The Exchange unit can be equipped with up to three magazine types in any combination. A magazine: L or H. Two magazines: L + L, H + H or L + H. Three magazines: L + L + L, H + H + H, L + H + H or L + L + H. Note: Every single magazine is intended for the same palletizing system. The magazine capacity is entirely dependent on the shape and size of the work pieces. More information, please refer to the table on our website, see link.

Transformer concept with the six-axle Industrial robot by Fanuc System 3R offers automation solutions with industrial robots, both stationary and rail can used in tool and mold making and precision manufacturing. FANUC's solutions cover the following areas of application: -Transfer weight from 70 to 700 kg -Radial range up to 3400 mm -complex motion sequences -Part handling • no matter what automation needs you have, the FANUC system can be adapted to your needs - it offers customer-specific solutions. • modern techniques and intelligent technical solutions with standardized modules provide a cost-efficient and at the same time flexible automation • user-friendly cell management software: complex automation made easy! • everything from a single source: GF machining solutions achieve one higher return! Transformer grows with your requirements: Scalable automation - Fanuc Start with a machine and low magazine capacity. Add a second machine and a revolver magazine to reach more capacity. Put the FANUC on Rails and build the magazine capacity to be able to charge other machines, or start right at the beginning with a similar solution. Tailored to your needs - custom solutions Milling application • 360 - stationary robot Fanuc • milling machine • frame magazine • charge / indexing station Milling application • Fanuc 360 on Rails • three milling machines • washing machine • frame magazine • charge / indexing station Milling application • Fanuc 700 on Rails • three milling machines • frame magazine • charge / indexing station For cost-efficient solutions Standardized modules 1 FANUC - transfer weight from 70-700 kg 2. Revolver Magazine - large capacity, small footprint 3. frame magazine - all frame magazine or half frame magazine for electrodes and workpieces 4. LFT small charging station - a single station to the renewed loading of pallets with workpieces or for use as a charging station. 5 LFT frame magazine 6 LFT large charger - loading and unloading of parts without stopping the automation cell 7 load / indexing station – loading and unloading of parts without stopping the automation cell 8 washing machine - cleaning, rinsing and drying of workpieces Technical specifications FANUC 70/165/210/360/700 FANUC on rail 70/165/210/360/700 More information, please refer to our website, see link. Magazine Magazines are available in two basic forms: as a frame and turret design. Each magazine has several shelves (number depends on the amount of the respective work pieces). More information, please refer to our website, see link. Accessories: Multiple charging station + LFT charging station To the loading and unloading during running automation cell • the station is equipped with ID antennas and presence detectors. • you can be configured according to the requirements by type of tool and workpiece size. Charge / indexing station Preparation of the workpieces with an indexing table. • round maximum workpiece size: diameter. 800 mm • maximum workpiece size, square: 570 x 570 mm • maximum load: 500 kg • load or work preparation area for all standard equipment • indexable all 30° • tray for oil and flushing fluid • presence detection Washing machine Washing machine for cleaning, rinsing and drying of metal components on a pallet. The unit consists of an insulated case with a lifting door, a fixed spray system and a pivoting range mount the unit is automatically loaded by the robot. Maximum component size 500 x 500 x 500 mm including pallet, Chuck and workpiece. Maximum weight 200 kg including range, Chuck and workpiece.