502,249 active members
7,078 visitors online
Register for free
Login Register
GK Werkzeugmaschinen

Contact

GK Werkzeugmaschinen GmbH
Lindenstraáe 21
64584 Biebesheim
Germany
06158 8286712
06158 86931

Route planner

Route planner

CNC Lathe - Inclined Bed Type KRAFT HS-22 mit Stangenlader 1200 (opt.)

Basis for negotiation
Holland


  • Reference number 1124-29999
    Manufacture Year not applicable
    Operation Hours not applicable
  • Metal working machine
  • Lathes
  • CNC-lathes (2-axes)
  • KRAFT
  • turning diameter:220 mm
    turning length:200 mm
    control:Fanuc 0i-TF Manual Guide
    bar material dia.:44 mm
    spindle speeds:4800 1/min.
    spindle drive:7,5/11 kW
    rapid speed:20 m/min
    travel -x axis:155 mm
    travel - z:200 mm
    CNC controller:Fanuc 0i-TF Manual Guide (Werkstattprogrammierung) + 10,4" LCD
    turret:12 fach
    heat exchanger for electr. cabinet:
    hydraulic unit:
    hollow chuck:hydraulisch, 200 mm
    transformator:
    coolant system:
    signal lamp:
    tool holder:4 Stück Innen, 6 Stück Außen, 2 Stück Plan
    CE-design:
    part catcher:
    bar loader:
    Tool setter:
    soft jaw:1 Satz
    part catcher:
    BORING SLEEVES :6 Stk. (Durchm. 8, 10, 12, 16, 20, 25 mm)

    Contains: 1.Control system Fanuc 0i-TD (8.4"COLOR LCD) 2.Spindle motor 7.5/11KW Fanuc â8/8000i 3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm) 4.X/Z-Axis stroke 155/220 mm 5.X/Z Axis rapid traverse 20/20 m/min 6.Hyd.hollow chuck 6" x 3 jaws 7.Hydraulic turret system 12 stations 8.Hyd. Unit for chuck with air cooler 9.Without tailstock 10.Standard splash guard 11.Electrical cabinet with heat exchanger 12.Coolant unit 13.Transformer 14.Chip conveyor with trolley (chain type) 15.Machine color TongTai grey/blue 16.Fanuc warranty Standard accessories: 1.O.D. tool holder x 2 pcs 2.O.D. tool gasket x 6 pcs 3.I.D. tool holder x 4 pcs 4.ID tool holder dia 32mm x 4 pcs 5.Boring sleeve x 6 pcs (Dia 10,12,16,20,25,32) 6.Drilling sleeve x 3 pcs (MT#1,2,3) 7.Soft Jaws x 1 set Options: 1.CE Mark 2.Balance of spindle dia 85 mm with bar capacity die 44 mm Spindle speed 4800 RPM & Hyd. hollow chuck 8" x 3 jaws 3.Tool presetter (by manual) 4.Add soft jaws x 5 sets for 8"chuck 5.Hard jaws x 1 set (for 8"chuck use) 6. Dynamic graphic display function

Send request

More machines from GK Werkzeugmaschinen GmbH