584,802 active members*
4,822 visitors online*
Register for free
Login Register
HAINBUCH - Banner
HAINBUCH Products
HAINBUCH GmbH
Chucks, others

Hydraulic stationary chuck HYDROK

Depending on size, combined with all adaptations 5-axis machining or rational multiple clamping - with HYDROK we offer a hydraulically actuated stationary chuck that provides even more implementation possibilities. Depending on size - you can use it with all clamping device adaptations, such as the MANDO Adapt mandrel-in-clamping device or with the jaw module. Thus in the future you can also rely completely on the intelligent HAINBUCH modular system, even for your stationary clamping device. Multiple clamping in confined spaces The smallest of the group: HYDROK 40 SE and 32 RD. Their modular base plates can be easily fitted together and enables multiple clamping with incredible holding forces in the most confined spaces. And with an additional tandem cylinder you can even generate the full clamping force with a weaker hydraulic unit.
Product details Homepage Product request
4-jaw clamping device InoFlex VF
4-jaw clamping device InoFlex VF
Chuck, others
HAINBUCH GmbH
Chucks, others
4-jaw clamping device InoFlex VF
4-jaw clamping device InoFlex VF - ideal for the raw parts milling machining OP10 - 4-sided clamping with compensation of the opposing jaws and 2-sided clamping possible as a stationary chuck or centric clamping vice - ideal for clamping workpieces sensitive to deformation - for I.D. & O.D. clamping - high repeatability & run-out accuracy
Product details Homepage Product request
Adaption clamping device MANDO Adapt T212
Adaption clamping device MANDO Adapt T212
Chuck, others
HAINBUCH GmbH
Chucks, others
No problem to change-over from O.D. clamping to I.D. clamping Change-over from O.D. clamping to perfect I.D. clamping, without changing the clamping device? No problem with MANDO Adapt: Place the mandrel in the mounted clamping device, tighten three screws, and lock the mandrel in the clamping device. Reduce time In this process the mandrel engages in the coupling of the clamping device via a sophisticated mechanism, where otherwise the clamping head engages. MANDO Adapt is attractive with extreme rigidity and precision. Without adjusting For rotating products, concentricity of 0.005 mm between chuck taper and mandrel taper can be achieved. For stationary clamping devices repeatability of 0.003 mm is possible. And best of all: This can all be accomplished without adjusting.
Product details Homepage Product request
Adaption clamping device MANDO Adapt T812
Adaption clamping device MANDO Adapt T812
Chuck, others
HAINBUCH GmbH
Chucks, others
No problem to change-over from O.D. clamping to I.D. clamping Change-over from O.D. clamping to perfect I.D. clamping, without changing the clamping device? No problem with MANDO Adapt: Place the mandrel in the mounted clamping device, tighten three screws, and lock the mandrel in the clamping device. Reduce time In this process the mandrel engages in the coupling of the clamping device via a sophisticated mechanism, where otherwise the clamping head engages. MANDO Adapt is attractive with extreme rigidity and precision. Without adjusting For rotating products, concentricity of 0.005 mm between chuck taper and mandrel taper can be achieved. For stationary clamping devices repeatability of 0.003 mm is possible. And best of all: This can all be accomplished without adjusting.
Product details Homepage Product request
End-stop system vario flex
End-stop system vario flex
Chuck, others
HAINBUCH GmbH
Chucks, others
End-stop system vario flex
The vario quick is an end-stop system with standardized adjustable workpiece end-stops. It saves valuable work preparation time and gives you significantly more flexibility. Since you always have the required clamping length on hand - without having to produce the end-stops yourself. The clamping length is set for the end-stop screws / blank screws via a threaded spindle. One half turn corresponds to 1 mm adjustment travel. The sets can be expanded individually with separately available end-stop and blank screws. The vario quick end-stop system can also be used stationary under specific conditions [table bore required]. As an alternative, we recommend our vario part system.
Product details Homepage Product request
End-stop system vario quick
End-stop system vario quick
Chuck, others
HAINBUCH GmbH
Chucks, others
End-stop system vario quick
The vario quick is an end-stop system with standardized adjustable workpiece end-stops. It saves valuable work preparation time and gives you significantly more flexibility. Since you always have the required clamping length on hand - without having to produce the end-stops yourself. The clamping length is set for the end-stop screws / blank screws via a threaded spindle. One half turn corresponds to 1 mm adjustment travel. The sets can be expanded individually with separately available end-stop and blank screws. The vario quick end-stop system can also be used stationary under specific conditions [table bore required]. As an alternative, we recommend our vario part system.
Product details Homepage Product request
Jaw chuck B-Top
Jaw chuck B-Top
Chuck, others
HAINBUCH GmbH
Chucks, others
Jaw chuck B-Top
Flexible for small lot sizes Fast jaw change with quick change design and high repeatability - that is what makes the B-Top jaw chuck product line so flexible. Particularly for small lot sizes. Thus in most cases machining the chuck jaw to size is unnecessary. Conveniently adapted to your requirement Also the insert bushing system is configured for small lot sizes and maximum flexibility. It enables clamping devices to be conveniently adapted to your requirement: Closed with ejector, spray nozzles, or with variable end-stop. Just the way you need it. And the innovative lubricating system ensures improved clamping force behavior of the wedge bar principle.
Product details Homepage Product request
DockLock
DockLock
Chuck, others
HAINBUCH GmbH
Chucks, others
DockLock
Are you tired of losing so much time due to change-over on your machining center? Then we have something for you. The DockLock zero-point clamping system in the hydraulic or pneumatic version. One clamping device quick change-over system for stationary applications. It allows you to change your clamping devices in two minutes. And with repeatability of ?0.005 mm, without alignment. A special feature: form fit clamping with a collet or clamping segments. That means a rigid clamping set-up and higher repeatability. This also prevents clamping marks on the clamping bolt as opposed to zero-point clamping systems with balls or sliders, which lead to inaccuracies and consequently to replacement of the clamping bolts. Likewise, no contamination and chips can get through, which ensures low-wear operation and reduces maintenance expenses.
Product details Homepage Product request
DockLock AC
DockLock AC
Chuck, others
HAINBUCH GmbH
Chucks, others
DockLock AC
You are short of personnel, but have to process your orders, preferably 24/7? Then the DockLock AC zero-point clamping system for automated fixture change-over, in either the hydraulic or pneumatic version, is perfect for you. The clamping device quick change-over system for stationary applications allows automated change-over of your clamping devices in two minutes. And with repeatability of ? 0.005 mm, without alignment. The design of the form fit clamping and power transmission is identical to the DockLock for manual set-up. In addition, it is equipped with a closure at the clamping position as protection against contamination and chips. That ensures even less wear and reduces maintenance expenses. In addition, standard features include an air sensing control, air-blast support isles and a piston position control for a safe and reliable automated process.
Product details Homepage Product request
Mandrel actuating units hs dock
Mandrel actuating units hs dock
Chuck, others
HAINBUCH GmbH
Chucks, others
Mandrel actuating units hs dock
Whether lathe or machining center Complete machining made easy: You cannot only use our MANDO and MAXXOS segmented mandrels on the lathe, you can also use them in stationary mode. Simply screw the mandrel onto the ms dock [manually actuated] or hs dock [hydraulically actuated] and you can clamp your workpiece from the inside, stationary mode. Precise, without vibration and with minimum set-up effort. The extremely wear-resistant segmented clamping bushing of case-hardened chromium-nickel-steel with the rubber between the segments, especially developed by HAINBUCH, makes it possible. Hydraulic actuating unit hs dock hs dock is an absolute powerhouse that enables hydraulic implementation of MANDO and MAXXOS segmented mandrels on machining centers. Media supply can be freely selected. It is actuated either from the side or via a base plate from below. Perfect when automation is involved.
Product details Homepage Product request
Mandrel actuating units ms dock
Mandrel actuating units ms dock
Chuck, others
HAINBUCH GmbH
Chucks, others
Mandrel actuating units ms dock
Whether lathe or machining center Complete machining made easy: You cannot only use our MANDO and MAXXOS segmented mandrels on the lathe, you can also use them in stationary mode. Simply screw the mandrel onto the ms dock [manually actuated] or hs dock [hydraulically actuated] and you can clamp your workpiece from the inside, stationary mode. Precise, without vibration and with minimum set-up effort. The extremely wear-resistant segmented clamping bushing of case-hardened chromium-nickel-steel with the rubber between the segments, especially developed by HAINBUCH, makes it possible. Manual actuating unit ms dock The hand-actuated ms dock in conjunction with stationary MANDO and MAXXOS segmented mandrels is ideal for machining centers, measuring machines, radial drill presses, parallel and angle plate clamping or for clamping on dividing heads. The version ms dock rotating can be used on turning and grinding machines until RPM 1/min.
Product details Homepage Product request
Eccentric chuck
Eccentric chuck
Chuck, others
HAINBUCH GmbH
Chucks, others
Eccentric chuck
Concentric and eccentric complete machining Concentric and eccentric complete machining in a single clamping set-up? That?s right! With our compact chuck you can turn an eccentric position on the workpiece - in a single set-up without having to re-chuck it! Thus you save time and money. Automatic change-over Change-over from concentric to eccentric takes just a few seconds - it is automatic and convenient due to the setting tool in the turret and the c-axis of the machine spindle. Minimum set-up times and no machine changes whatsoever. And first and foremost: You can use your normal clamping cylinder.
Product details Homepage Product request
Manual chuck TOROK
Manual chuck TOROK
Chuck, others
HAINBUCH GmbH
Chucks, others
Manual chuck TOROK
Easy manual actuation The TOROK manual chuck is primarily used in tool prototyping on machines without a clamping cylinder. For example, thanks to its easy manual actuation, when used on grinding machines you can safely and delicately clamp. In combination with our clamping device adaptations, such as the MANDO Adapt mandrel-in-chuck or the jaw module, many more clamping options are possible. Lightweight variant And most recent: Thanks to the optional lightweight CFRP design, with the TOROK CFK you save one-third the weight. This is particularly set-up friendly and it offloads the machine spindle bearings.
Product details Homepage Product request
Manual chuck TOROK CFRP
Manual chuck TOROK CFRP
Chuck, others
HAINBUCH GmbH
Chucks, others
Manual chuck TOROK CFRP
Easy manual actuation The TOROK manual chuck is primarily used in tool prototyping on machines without a clamping cylinder. For example, thanks to its easy manual actuation, when used on grinding machines you can safely and delicately clamp. In combination with our clamping device adaptations, such as the MANDO Adapt mandrel-in-chuck or the jaw module, many more clamping options are possible. Lightweight variant And most recent: Thanks to the optional lightweight CFRP design, with the TOROK CFK you save one-third the weight. This is particularly set-up friendly and it offloads the machine spindle bearings.
Product details Homepage Product request
Power chuck SPANNTOP mini
Power chuck SPANNTOP mini
Chuck, others
HAINBUCH GmbH
Chucks, others
Power chuck SPANNTOP mini
Lower mass The »mini« series really shines with a mass reduced by as much as 30 %, and a chuck diameter that is reduced by 1/3. This means reduced energy consumption and better tool accessibility. Naturally, additional adaptation elements may also be used with the SPANNTOP mini. An additional ring enables use of the adaptation devices that are also used with the SPANNTOP nova. Reduced interference contour Thanks to the reduced interference contour, it is easier to choose the tool that you need. Now it can also be shorter and more stable - on the main and sub spindles. Particularly in the case of limited installation space and in series operation, SPANNTOP mini is ideal: Lower energy consumption, dynamic spindle acceleration, and shorter cycle times reduce the costs per workpiece. Minimalism that pays off!
Product details Homepage Product request
Magnet module
Magnet module
Chuck, others
HAINBUCH GmbH
Chucks, others
Magnet module
Clamp difficult or easily deformable workpieces In daily use you are optimally equipped with the TOPlus or SPANNTOP chucks. However, there are always components that are difficult to clamp due to the contour, or that will be deformed through radial clamping. So what is required is an axial chuck, which in addition can also be set-up very fast. Clamp axially on a neodymium magnet The answer: HAINBUCH magnet module. With the magnet module you can clamp components axially on a neodymium magnet. The HAINBUCH magnet module is set-up in only 30 seconds. Your basic clamping device is already mounted. You exchange the clamping head that is included in the scope of delivery. When clamping, the magnetic clamping device is pulled onto the flat contact area of your basic clamping device.
Product details Homepage Product request
Morse taper adaptation
Morse taper adaptation
Chuck, others
HAINBUCH GmbH
Chucks, others
Morse taper adaptation
Supplement for modular system The morse taper adaptation is a great supplement for the HAINBUCH modular system. Whether face driver, fixed center, a manually activated mandrel, or even tools - with this adaptation you insert anything that you can adapt into the morse taper connection. Extending your chuck within seconds Therefore, you have the possibility of extending your chuck with many additional functions within seconds. This is made possible by the CENTREX quick change-over interface integrated in the adaptation. This means that assembly does not require alignment. Also it is executed with a change-over accuracy of < 0.003 mm at the interface.
Product details Homepage Product request
Quick change-over system centroteX M
Quick change-over system centroteX M
Chuck, others
HAINBUCH GmbH
Chucks, others
centroteX and mandoteX ? ideal for today's high-paced manufacturing environment! It is feasible to equip the HAINBUCH quick change-over systems on all your machines, giving you the advantage of changing clamping devices in a matter of minutes, thus earning money quicker. This is because these set-up devices allow you to manufacture with job orientation. And, thanks to our unique CENTREX technology, you will achieve a repeatability of ? 0.003 mm on the interface. However, our high-speed solutions have even more to offer: As you will experience shorter machine downtimes along with reduced processing and throughput times, your quick change-over systems will pay off in no time. Better yet, you will not have to compromise on quality, rigidity or pre- cision. Select the spindle connection and the clamping device that is right for you from our extensive assortment. We can even accommodate you if you are already using clamping devices made by other manufacturers.
Product details Homepage Product request
Quick change-over system centroteX S
Quick change-over system centroteX S
Chuck, others
HAINBUCH GmbH
Chucks, others
centroteX and mandoteX ? ideal for today's high-paced manufacturing environment! It is feasible to equip the HAINBUCH quick change-over systems on all your machines, giving you the advantage of changing clamping devices in a matter of minutes, thus earning money quicker. This is because these set-up devices allow you to manufacture with job orientation. And, thanks to our unique CENTREX technology, you will achieve a repeatability of ? 0.003 mm on the interface. However, our high-speed solutions have even more to offer: As you will experience shorter machine downtimes along with reduced processing and throughput times, your quick change-over systems will pay off in no time. Better yet, you will not have to compromise on quality, rigidity or pre- cision. Select the spindle connection and the clamping device that is right for you from our extensive assortment. We can even accommodate you if you are already using clamping devices made by other manufacturers.
Product details Homepage Product request
Quick change-over system mandoteX
Quick change-over system mandoteX
Chuck, others
HAINBUCH GmbH
Chucks, others
Quick change-over system mandoteX
centroteX and mandoteX ? ideal for today's high-paced manufacturing environment! It is feasible to equip the HAINBUCH quick change-over systems on all your machines, giving you the advantage of changing clamping devices in a matter of minutes, thus earning money quicker. This is because these set-up devices allow you to manufacture with job orientation. And, thanks to our unique CENTREX technology, you will achieve a repeatability of ? 0.003 mm on the interface. However, our high-speed solutions have even more to offer: As you will experience shorter machine downtimes along with reduced processing and throughput times, your quick change-over systems will pay off in no time. Better yet, you will not have to compromise on quality, rigidity or pre- cision. Select the spindle connection and the clamping device that is right for you from our extensive assortment. We can even accommodate you if you are already using clamping devices made by other manufacturers.
Product details Homepage Product request
Segmented clamping bushings RD
Segmented clamping bushings RD
Chuck, others
HAINBUCH GmbH
Chucks, others
Segmented clamping bushings RD
In terms of precision, stability, and flexibility the vulcanized segmented clamping bushings are unbeatable. They consist of segments made of chrome/nickel, case hardened steel that is very hard, extremely wear resistant, and rigid [60 HRC]. Plus, they do not have to »bend« to clamp the workpiece. In addition, all functional surfaces are completely ground in one clamping set-up. The result: maximum run-out accuracy, maximum holding power, and long life span.
Product details Homepage Product request
Segmented clamping bushings SE
Segmented clamping bushings SE
Chuck, others
HAINBUCH GmbH
Chucks, others
Segmented clamping bushings SE
The segmented clamping bushing SE with the hexagon socket sits on the clamping pyramid, absolutely form-fitted in every clamping position and thereby enables maximum machining performance with minimal vibration and thus less tool wear. The full-surface contact of the segmented clamping bushing on the mandrel ensures a significantly better insensitivity to contamination than previous segmented clamping bushing/mandrel systems. Therefore, these segmented clamping bushings are even better suited for raw material, cast and forged parts, as well as fine-particle non-ferrous metals such as brass. And they offer this suitability at run-out of ? 0.01 mm and in the premium version at ? 0.007 mm.
Product details Homepage Product request
Mandrel MAXXOS
Mandrel MAXXOS
Chuck, others
HAINBUCH GmbH
Chucks, others
Mandrel MAXXOS
Maximum machining capacity MAXXOS T211 is a mandrel with a hexagonal pyramid shape instead of a round taper - perfect for demanding and reliable process manufacturing. Through the hexagonal clamping pyramid, maximum transmission forces can be realized. The segmented clamping bushing with the hexagon socket sits on the clamping pyramid with an absolute positive fit, which enables maximum machining capacity with less vibration and thereby less tool wear. The lubrication, combined with its leak-tightness ensures an extremely constant production flow and therefore maximum reliability. By the way, our segmented clamping bushings offer a factory-standard run-out accuracy of ≤ 10 μm. If you need even greater precision, there are two additional levels of run-out quality to choose from. Even a run-out accuracy of ≤ 2 μm is possible upon request.
Product details Homepage Product request
Clamping head RD
Clamping head RD
Chuck, others
HAINBUCH GmbH
Chucks, others
Clamping head RD
This development represents more than 30 years of SPANNTOP experience. It exploits all the advantages of the latest machine tools. This clamping head is not only extremely powerful, it is also convincing through simple handling. With the changing fixture you set up in no time. The combination of steel and rubber, specially developed by HAINBUCH, in conjunction with a vulcanization that has been perfected over decades, is designed for maximum speed and holding force - with optimal concentricity, and incredible rigidity and service life.
Product details Homepage Product request
Clamping head SE
Clamping head SE
Chuck, others
HAINBUCH GmbH
Chucks, others
Clamping head SE
With our hexagonal clamping heads you get up to 25 % more clamping force and higher output with the same clamping cylinder actuating force that is used to actuate our SPANNTOP chucks. The pyramid arrangement of glide surfaces makes it possible. In addition the hexagonal geometry ensures that TOPlus is more resistant to contamination than former clamping head / chuck systems. Therefore, TOPlus is even better suited for raw material, cast and forged parts, as well as fine-particle non-ferrous metals such as brass. With a concentric precision of ? 0.005 mm!
Product details Homepage Product request
Loading ...