530,010 active members*
2,734 visitors online*
Register for free
Login Register
HBN Werkzeugmaschinen

Contact

HBN Werkzeugmaschinen GmbH
Botzweg 40b
47839 Krefeld
Germany
+49 (0)2151 62 175 90
+49 (0)2151 62 175 92

Route planner

Route planner

2 x EMAG VL 4 CNC-Vertical Turning Machines with TrackMotion

Asking price


  • Reference number 5430_01+02
    Manufacture Year 2015
    Operation Hours not applicable
  • Metal working machine
  • Lathes
  • Vertical turning machines
  • FANUC 32i - B
  • Working area
    chuck diameter mm 260
    swing max. mm 280
    workpiece diameter mm 200
    work piece length mm 200
    travel – X-axis mm 760
    travel – Z-axis mm 415
    rapid motion – X-axis m/min 60
    rapid motion – Z-axis m/min 30
    Main spindle
    spindle flange – DIN 55026 No. 6
    spindle diameter in front bearing mm 110
    spindle rotation speed max. rpm 4.500
    full output at spindle rotation speed rpm 850
    spindle positioning accuracy degree +/- 0,01 angle degree
    power requirement at 40% / 100% duty cycle kW 25 / 18
    torque at 40% / 100% duty cycle Nm 280 / 200
    Turret with driven tools
    disc turret head with station 12
    shaft diameter DIN 69880 VDI mm 40
    spindle rotation speed max. rpm 6.000
    torque / capacity at 10% ED Nm / kW 40 / 8,5
    torque / capacity at 40% ED Nm / kW 24 / 7,5
    torque / capacity at 80% ED Nm / kW 17 / 5,5
    torque / capacity at 100% ED Nm / kW 15 / 3,5
    Electrical configuration
    electrics – voltage / frequency V/Hz 400 / 50
    connected load kW 36
    supply fuse A 63
    Machine dimension & weight
    machine weight approx. kgs 9.000
    dimension of the machine mm 2.300 x 5.300
    height of the machine (with cable carrier chain) mm 2.740 (3.650 mm)
  • Accessories and further Information for both machines:

    ▪ CNC control FANUC 32i - B
    ▪ Control panel 12" TFT touch colour screen
    ▪ Workpiece measurement on both machines
    ▪ 3-colour signal lamp
    ▪ L-Shuttle for the workpiece transport between pick-up station in the machine and
    the automation of chaining (TrackMotion). With one carrier prism each for raw part
    and machined workpiece.
    Workpiece diameter 100 - 200 mm
    Workpiece height 200 mm
    ▪ TrackMotion - Automation for 2 vertical lathes, 1 workpiece storage as circulating
    conveyor for raw parts, 1 workpiece storage as circulatin conveyor for finished parts.
    on a modular rail system (track) moves an NC-controlled Automation slide (TransLift).
    the TransLift contains a freely programmable electric gripper unit with mechanical
    gripping force safety device. With the gripper unit the workpieces are positioned or
    turned. Protective device for open workpiece transport system. CNC-control system
    FANUC
    ▪ Blowing off the workpiece and the clamping device
    ▪ Coolant equipment, cooling lubricant supply 15 bar (50 Hz),
    Coolant pump Capacity approx. 80 i/min at 15 bar
    ▪ Coolant tank with paper belt filter
    ▪ Cooling lubricant through the tools
    ▪ Chip conveyor - hinged belt design, to the rear for wet and dry conveying
    machining, with integrated cooling lubricant tank
    ▪ Dust and oil mist extraction from the working area

Send request

More machines from HBN Werkzeugmaschinen GmbH