531,956 active members*
2,134 visitors online*
Register for free
Login Register
HESSE + CO Maschinenfabrik

Contact

HESSE + CO Maschinenfabrik GesmbH
Industriezentrum NÖ-Süd, Straße 4 Objekt 8
2351 Wiener Neudorf
Austria
+43/2236/638 70-0
+43/2236/636 62

Route planner

Route planner

ZMM CU 500 MRD

Asking price


  • Reference number 1069-2353
    Manufacture Year not applicable
    Operation Hours not applicable
  • Metal working machine
  • Lathes
  • Centre lathes
  • ZMM
  • 250 mm
    500 mm
    300 mm
    700 mm
    400 mm
    1.500 mm
    . 8 Nr
    72 mm
    80 M
    11 kW
    315 mm
    130 mm
    90 mm
    5 MK
    230 mm
    2.950 kg
  • driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.000 mm € 34.700,- turning length 2.000 mm € 36.910,- turning length 3.000 mm € 40.720,- turning length 4.000 mm € 45.100,- turning length 5.000 mm € 55.740,- centre height: 250 mm swing over bed: 500 mm swing over cross slide: 300 mm swing in gap: 700 mm width of bed: 400 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 8 spindlebore: 72 mm spindle taper: MT 80 spindle speeds (infinitely variable in 3 subranges): 25 - 100; 100 - 400; 500 - 2.000 rpm main motor power: 11 kW number of feeds: 120 longitudinal feed range: 0,04 - 12 mm/r cross feed range: 0,02 - 6 mm/r number of threads: metric thread range (64): 0,5 - 120 mm inch thread rangel (64): 60 - 1/4 Tpi module thread range (64): 0,125 - 30 DP thread range (64): 240 - 1 cross slide travel: 315 mm top slide travel: 130 mm tailstock quill diameter: 90 mm tailstock quill taper: MK 5 tailstock travel: 230 mm weight approx.: 2.950 kg

    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from HESSE + CO Maschinenfabrik GesmbH