- Fast and easy integration of intelligent sensors into the PLC world
- Straightforward web configuration instead of time-consuming and costly programming
- No special PC software required
- PLC connection via fieldbus protocols PROFINET, PROFIBUS, EtherNet/IP and others
- Tailored smart additional functions
App are used for parameter setting and set-up of IO-Link sensors, 1D/2D code readers, 3D cameras and RFID read/write heads.
ifm also offers apps for logging and saving process data of AS-i IO-Link modules and for managing AS-i configurations.
The single user licence for CODESYS is already included. The apps are loaded into the AS-i gateways. They establish the connection between AS-i and common fieldbus systems such as EtherNet/IP, PROFIBUS, PROFINET or EtherCAT. They control the data exchange to the sensor/actuator level and communicate rapidly with the superior control level.
- Fast and easy integration of intelligent sensors into the PLC world
- Easy, fast and intuitive start-up of 1D/2D code readers, 3D cameras and RFID readers
- Apps for operation on AS-Interface gateways with fieldbus interface
- Simple, clear representation of the process values
- Shortened set-up time during commissioning
The LINERECORDER SENSOR is a software for clearly structured online and offline parameter setting of ifm IO-Link sensors via a USB adapter. It allows consistent parameter setting and visualisation of all sensors and actuators with IO-Link interface.
App are used for parameter setting and set-up of IO-Link sensors, 1D/2D code readers, 3D cameras and RFID read/write heads. ifm also offers apps for logging and saving process data of AS-i IO-Link modules and for managing AS-i configurations.
- Allows local or remote diagnostics
- GSM modem quad-band for worldwide use
- High-performance CAN interface for various communication tasks
- Communication in real time and via the internet portal
- Data logging directly on the mobile vehicle
Diagnostic and service units are used for CAN system analysis, for remote maintenance and for position and route detection of mobile machines such as construction equipment, agricultural and forestry machinery, municipal vehicles and vehicles for transport and logistics.
Wireless systems - CANremote as a radio modem with integrated gateway, for example - help enable remote maintenance.
CAN bus diagnostic units can be used to detect the number of messages or error frames or display the current bus load.
Handheld terminals allow the user to monitor and enter data messages.
CANfox is an interface for the connection of a CAN system to a USB interface.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.