542,287 active members*
4,780 visitors online*
Register for free
Login Register
ifm group of companies Products
ifm group of companies
Software for production planning and control (PPC)

Pamareter setting and operating software

- Quick set-up of sensors
- User-friendly setting of parameters
- Intuitive, user-friendly handling

Operating and parameter setting software is used to set up and configure IO-Link sensors, vision sensors, cameras and diagnostic electronics for vibration monitoring.

The function of a sensor can be monitored in the "Monitor" mode. This facilitates set-up and parameter setting considerably. Process values, images, current parameter settings and reading results can be graphically visualised.
A "Service" mode is often offered for diagnosis. The service report allows the user to view reports, save the history of parameter sets, measured data and recordings, make statistical evaluations and display the last sensor images of good or bad readings.
Product details Homepage Product request
https://www.ifm.com/de/en/category/095/095_020
https://www.ifm.com/de/en/category/095/095_020
Software for production planning and control (PPC)
ifm group of companies
Software for production planning and control (PPC)
- Simple data integration using standard OPC interface
- Supports OPC specifications Data Access 1, 2, 3 and OPC XML-DA Windows
- Supports namespace browsing
- Simple network configuration thanks to OPC tunnel
- OPC Store and Forward in case of network errors

The OPC server software provides a software interface which standardises the data from the ifm electronic diagnostic electronics VSE and the ifm code reader for integration into a higher level system. The software licences are divided into four levels and are dependent on the number of networked units.
Different OPC client programs process the available OPC data enabling a wide variety of user scenarios.
Using the VSE diagnostic electronics it is possible to export and describe previously configured vibration characteristics and monitoring parameters such as switch points, trigger and speed signals.
For the code reader the OPC server software also offers standardised access to decoded reading results and various parameters.
Product details Homepage Product request