502,702 active members
6,035 visitors online
Register for free
Login Register

ILIX Präzisionswerkzeuge

Products
DHMTR indexable insert drills
DHMTR indexable insert drills
Drill
ILIX Präzisionswerkzeuge GmbH
Drills
DHMTR indexable insert drills
A combination of solid carbide inserts and steel body.
Drills with solid carbide inserts and a HSS pilot drill,
This guarantees that excellent linearity of bore.
DHMTR indexable insert drills for drilling up to 10 x Ø
DHMTR series covers a diameter range of 45 to 130 mm.

Applications: steel, stainless steel, gray iron, ductile iron, nonferrous metals
For more information, find in the main catalog 2016 page 129-136
Ps product details:. Go to page 129 Enter and you're on the DHMTR page!
Product details Homepage Datasheet Product request
High Performance Drills
High Performance Drills
Drill
ILIX Präzisionswerkzeuge GmbH
Drills
High Performance Drills
Twist drill solid carbide and HSS-CO with coatings for high cutting speed and long service life.
Product details Homepage Product request
Micro Drills mit Innenkühlung
Micro Drills mit Innenkühlung
Drill
ILIX Präzisionswerkzeuge GmbH
Drills
Micro Drills mit Innenkühlung
The surface of the cooling channel holes were smoothed over so that the flow rate
is 3 times higher with the same coolant pressure compared with standard drills with IK.

Further advantages:
-4 Guide chamfers
-polished grooves for a better chip evacuation
-improved bore surface quality
-Multilayer coating TiALN-Futura plus
a very good wear resistance, low friction and stability
(also in the MMS application)
-in many materials can be used
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
Record Evolution VA
Record Evolution VA
Drill
ILIX Präzisionswerkzeuge GmbH
Drills
Record Evolution VA
The special helix geometry oft he newly added Record Evolution VA guarantees ideal chip removal with high cutting parameters and the cutting edge design permits top efficiency especially on stainless steel, non and low alloy steel, aluminium, titanium and copper.
Product details Homepage Product request
Record HD
Record HD
Drill
ILIX Präzisionswerkzeuge GmbH
Drills
Record HD
A chip breaking design. Beside the well established TiN coating, TiAlN Futura and TiN coated tips are available. The titan-Aluminium-Nitrid multi layer coating allows dry machining in steel.
Product details Homepage Product request
Record VA - VA i
Record VA - VA i
Drill
ILIX Präzisionswerkzeuge GmbH
Drills
Record VA - VA i
Record VA and VAi solid carbide drills are specifically engineered to drill stainless steel and high temperature alloys and ensure high performances longer tool life even in conventional steel materials and titanium alloys.
Product details Homepage Datasheet Product request
Twist Drills
Twist Drills
Drill
ILIX Präzisionswerkzeuge GmbH
Drills
Twist Drills
HSS Twist Drills, HSS-CO Drills, HSS-CO 8 Twist Drills,
HSS Microdrills up Ø 0.05 mm - Ø 1.45 mm, Solid Carbide Microdrills von Ø 0.10 mm - Ø3.0 mm,
HSS Twist Drills for deep hole drilling 40 / 60 u. 70 x D,
HSS und Solid Carbide Center Drills, Solid Carbide and Carbide Tipped Twist Drills,

Ps. Product details: Go to page 155 Enter and you are already on the side of the Twist Drills.
Product details Homepage Product request
Core drills with 3 flutes
Core drills with 3 flutes
Boring tool
ILIX Präzisionswerkzeuge GmbH
Boring tools
Core drills with 3 flutes
Core drills with 3 flutes and straight shank made of HSS.
Product details Homepage Product request
Countersinks 60°
Countersinks 60°
Boring tool
ILIX Präzisionswerkzeuge GmbH
Boring tools
Countersinks 60°
Countersinks 60°, with 3 flutes, made of HSSrelieved, for chatter free operation.

• Form C: with straight shank
• Form D: with Morse taper shank
Product details Homepage Product request
Adjustable hand reamers made of HSS
Adjustable hand reamers made of HSS
Reamer
ILIX Präzisionswerkzeuge GmbH
Reamers
Adjustable hand reamers made of HSS range of expansion max. 1 % over nominal size.
Product details Homepage Product request
Machine reamers
Machine reamers
Reamer
ILIX Präzisionswerkzeuge GmbH
Reamers
Machine reamers
Machine reamers made of HSS / HSS-CO and solid carbide with cylindrical shaft and morse taper shank.
For use in through holes and blind holes in tolerance H7.
HSS-CO machine reamers according to DIN 212 B / D and solid carbide reamers similar to DIN 8093 in 1/100 step for special hole sizes e.g. Ø 5 mm E9.
Available from stock

Ps product details:. Go to page 658 Enter and you're on the DHMTR page!
Product details Homepage Product request
Maschine chucking reamers with straight shank
Maschine chucking reamers with straight shank
Reamer
ILIX Präzisionswerkzeuge GmbH
Reamers
Maschine chucking reamers with straight shank, made of solid carbide

• ILIX Norm similar DIN 8093
• with radial cooling for through holes
• to produce holes with H7 tolerance
• Radial Cooling
Product details Homepage Product request
High Performance Taps
High Performance Taps
Taps
ILIX Präzisionswerkzeuge GmbH
Taps
High Performance Taps
High Performance Taps for machining steel / rust. acid- and heat-resistant steel / cast iron and aluminum in through and blind holes.

• Tool material: HSS-Co / M35 (S 6-5-2-5). The toughness of this cutting material allows very good
Services.
HSS-CO-PM (powder high-speed steel) for higher toughness and improved cutting edge stability.
• Coating:. TiCN / TIN / TiAlN Futura u Hard Lube, through this high surface hardness to increase the service life and improved chip flow is conceded.
Very high cutting speeds can be achieved under ideal conditions.
• cutting geometry. For high cutting speeds and constant tolerances
• Internal cooling: Allows higher cutting data and longer service life. Coolant pressure at least 10-15 bar.

Ps product details:. Go to page 289 Enter and you're on the side of High Performance Taps.
Product details Homepage Product request
Machine taps
Machine taps
Tap
ILIX Präzisionswerkzeuge GmbH
Taps
Machine taps
Machine taps with reinforced shank Multi Aero for thread MJ.
Product details Homepage Product request
Multi GG i
Multi GG i
Tap
ILIX Präzisionswerkzeuge GmbH
Taps
Multi GG i
Multi GG i – the high performance taps for tapping blind and through holes in cast iron.

• Cutting material: The tenacity of this material achieves very good results when machining grey cast iron, also when cavities and inclusions are existing. Powder metallurgy for higher toughness and cutting edge stability
• Surface treatment: Nitrided. Improved surface hardness for better resistance towards abrasive materials.
• Surface coating: High surface hardness for improved life time and chip flow. Under ideal conditions very high cutting speeds can be achieved.
• Cutting edge geometry: For high cutting speed and constant tolerances in grey cast iron.
• Coolant: Allows higher cutting speeds and better lifetime. Minimum coolant pressure 10 – 15 bar.
Product details Homepage Product request
Taps
Taps
Taps
ILIX Präzisionswerkzeuge GmbH
Taps
Taps
HSS-CO / HSS-CO PM Machine Taps
HSS-CO / HSS-CO PM Cold Forming Taps for thread types:
M Metric coarse
MF Metric fine
UNC Unified coarse
UNF Unified fine
BSW Whitworth BSW
BSP / G ( R ) Gas thread
NPT National Pipe Taper Thread ANSI B 1.20.1
( with dryseal )
NPTF Dryseal National Pipe Taper Thread ANSI B 1.20.1
( without dryseal )
PG Conduit Thread
BSPT ( RC )
EGM Metric wire thread insert
Ps. Product details: Go to page 468 Enter and you are already on the side of the taps.
Product details Homepage Product request
EXO Rapid Ni
EXO Rapid Ni
Thread milling cutter
ILIX Präzisionswerkzeuge GmbH
Thread milling cutters
EXO Rapid Ni
The ideal solution for difficult to machine and exotic special alloys.

• Dimensions: DIN 371
• Range: M 2 – M 10
• Chamfer: Form B – 3 Threads
• Tolerance: 6 HX
• Cutting material: HSS-Co/M35 (S 6-5-2-5)
Product details Homepage Product request
Cold forming taps with reinforced shank
Cold forming taps with reinforced shank
Cold forming tap
ILIX Präzisionswerkzeuge GmbH
Cold forming taps
Cold forming taps with reinforced shank for unified coarse thread UNC - ASME – B 1.1 dimensions generally as per DIN 371.

• Ref. 6738 without oil grooves
• Ref. 6802 with oil grooves
Product details Homepage Product request