LASERPIN Star2 MTX03 Touchscreen

•  
  Reference number 1075-6991

  Manufacture Year 2020

  Operation Hours not applicable
• Main Category
  Plastics, rubber and rubber processing
• Category
  Plate, profile and film extrusion machines
• Manufacturer
  LASERPIN
• Control
  Touchscreen
• Technical data

  foil width

  1400 mm

  max. speed

  250 m/min

  Diameter of the holes

  0,3-2,8

  temperature

  400 °C

  heating capacity

  37 kW

  Control

  Touchscreen

• Description
  Perforation machine (Star_2) with unwinder and rewinder (MTX_03 touchscreen)
  
  Machine is new, used less than 100 hours.
  
  HOT MICROPERFORATORS = With the hot needle technique, the hole is created by
  the melting of the material caused by heated needles.
  The pin cylinders are mounted on a perforation roller. They are heated to a
  temperature of 400°C by special lamps.
  This technology creates homogeneous holes and was developed in the 1980s.
  
  An industry standard wiring closet system with Wifi modem (purchased separately
  and
  configured), for wireless connection to any existing inline production system.
  
  User-friendly and multilingual control panel with additional buttons/knobs for
  manual operation.
  
  Intelligent Web Guidance System : For precise control over
  perforation position and precise foil width position.
  - Already synced with the machine.
  - Automatic and manual command system.
  
  14 steel/rubber drums and 4 pneumatic cylinders for precise film positioning
  
  With a counter roller with banana rubber roller.
  
  Foil cutter with pneumatic clamping shaft for tighter gripping of the foil roll
  without damaging the foil roll.
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.
• State
  Used

I like it 0