MBL65

Everything from a single source - bar feeder LMI and ABC
Bar feeder for optimum turning results.

Bar feeder for INDEX ABC
Material bar stop in 1.5 s
Cycle-parallel reloading

> Material bar stop in 1.5 s
> Material bar reload in 5 s
> Cycle-parallel reloading
> Fast adaptation of the guide half shells to the bar diameter
> Hydrodynamic oil cushion in the guide channel
> Very short design, only approx. 100 mm longer than the material bar
> Material bar is always guided to the center of the spindle

Translated with DeepL

INDEX bar feeder MBL22-8/ 24-6/ 32-6/ 40-6/ 40-8
Productivity increase for the multispindle machine.

Hydrodynamic guiding concept
Bar feeder and machine from one source

- Bars are tapped parallel to the main time of the machine, this allows very fast bar changes
- In numerous applications higher maximum speeds are possible
- Set-up of the loading side and the tapping unit during production
- Material loading on the loading side and setup of the spot drilling unit during production
- Optimal accessibility due to large doors on the front side
- Vibration damping construction
- Bar feed in all positions via NC motor
- Bar feeder available in 2 versions:
>Version 3300: bar length from 1500 - 3300 mm
>Version 4300: bar length from 2000 - 4300 mm

Translated with DeepL

MBL76 electronic bar feeder for optimum turning results.
Fast bar change and precise guidance.

Bar loading magazine for single-spindle lathes.
Shortest set-up times & ergonomic accessibility
Quick change guide bushes

> Shortest set-up times due to good and ergonomic accessibility and quick-change guide bushes
> Favorable loading height, loading during machining possible
> Cast mineral body for very high rigidity and damping
> Purely electrical, so no hydraulic or pneumatic connections are required
> Shorter design than other comparable magazines
> The magazine is offered in two bar lengths (3.2 m and 4.2 m)

Translated with DeepL