584,812 active members*
5,595 visitors online*
Register for free
Login Register

Innovalia Metrology

News

2020-07-30 Innovalia Week and Innovalia Convention 2020 in a virtual format

Innovalia Week and Innovalia Convention 2020 in a virtual format
The Innovalia Group held the Innovalia Week from July 13th to 17th, a virtual event over a week where the Innovalia Group opened its doors to present solutions, tools and methodologies that are developed and marketed in the group and that are key to overcome the current challenges of the industry. During the Innovalia Week, the group offered a daily webinar related to the Innovalia Group’s work... Go to press info

2020-07-07 Innovalia Group: The commitment to innovation and technology must be stronger than ever

Innovalia Group: The commitment to innovation and technology must be stronger than ever
In times of crisis, the ability to adapt, to change and to have a high technological value product is key and many times will indicate the survival of a company. For the Basque industrial group, the Innovalia Group, innovation has always been part of their business strategy. Go to press info

2020-03-10 IDSA Spanish Hub: international project to facilitate the opening and reliable exchange of data

IDSA Spanish Hub: international project to facilitate the opening and reliable exchange of data
The IDSA Spanish Hub initiative is piloted by the Innovalia Group and supported by the Bilbao City Council, SPRI, the Ministry of Industry, the European Commission and the World Economic Forum. Interview with Óscar Lázaro, director of the Innovalia Association. Go to press info

2019-10-10 Innovalia presented its metrology solutions in France, Argentina and Germany during September

Innovalia presented its metrology solutions in France, Argentina and Germany during September
Innovalia Metrology, metrological unit of the Innovalia Group, presents during September its Metrology solutions at the EMO in Hannover, the MWC in Paris and the AOG in Argentina. Thanks to the three major fairs, the Basque company was able to present M3, its universal platform for quality management muti-system that allows managing the quality of the process at any stage. Go to press info

2019-09-11 EMO 2019 – Innovalia Metrology: presents digital metrology solutions to make the leap to automation

EMO 2019 – Innovalia Metrology: presents digital metrology solutions to make the leap to automation
Innovalia Metrology presents its metrology solutions for the first time in the EMO (Hall 6 stand E02). M3 Hybrid is the result of years of experience and innovation and is also the opportunity to simplify the measurement process thanks to M3 Software, a software created to acquire and process data in a unique way and thanks to its perfect adaptation to Optiscan we It allows us to make digital ... Go to press info

2019-08-15 Innovalia Group convention in Zamudio

Innovalia Group convention in Zamudio
The Innovalia Group, a strategic alliance of Basque technology-based companies, held its convention on Friday July 5th. Go to press info

2019-07-08 Innovalia Group joins co-creation laboratory 5TONIC and explors 5G for metrology applications

Innovalia Group joins co-creation laboratory 5TONIC and explors 5G for metrology applications
Innovalia, a strategic alliance of seven companies created in 2000 with the objective of consolidating business activities and development on three fundamental pillars: innovation, technology, and internationalization, is to join the 5TONIC co-creation laboratory in Madrid as a new collaborator. The objective of this collaboration is the experimentation of 5G technologies in the context of... Go to press info

2017-11-03 Innovalia Metrology will present Metrology 4.0 solutions at the Blechexpo in Sttutgart

Innovalia Metrology will present Metrology 4.0 solutions at the Blechexpo in Sttutgart
Innovalia Metrology will present M3 Hybrid and M3MH at the next Blechexpo exhibition in Sttutgart Germany, from November 7th to November 10th. Go to press info

2017-10-06 Innovalia launches the Digital Innovation Hub, a digitalization reference center in the EU

Innovalia launches the Digital Innovation Hub, a digitalization reference center in the EU
The general assembly of BeinCPPS, a project of the European Commission, took place in the AIC a few months ago. BeinCPPS is one of the most important projects under the ICT innovation support program in advanced manufacturing systems for SMEs (I4MS) of Horizon 2020. Go to press info

2017-10-03 Innovalia has celebrated the annual I4MS meeting of the European initiative in Madrid

Innovalia has celebrated the annual I4MS meeting of the European initiative in Madrid
The basic idea is to enable and foster the collaboration of manufacturing SMEs and mid-caps across their value chains through the help of European competence centers/innovation hubs (such as HPC centers, top universities, application oriented research organizations) in predominantly cross-border experiments to create a win-win situation for all actors. Go to press info

2017-09-13 Metromeet calls the main responsibles for the evolution towards Industry 4.0

Metromeet calls the main responsibles for the evolution towards Industry 4.0
Metromeet has already open the call for papers for the 14th edition of the International Conference on Dimensional Metrology. This edition will take place in Bilbao during 21, 22 and 23th of March 2018. Go to press info

2017-09-01 “Metrology has changed and will continue to change” Interview with Toni Ventura, CEO of Datapixel

“Metrology has changed and will continue to change” Interview with Toni Ventura, CEO of Datapixel
Toni Ventura is a senior telecommunications engineer, specializing in electronics. He is founder and CEO of Datapixel in Spain. In addition, he is a member of the Executive Committee of the European Machine Vision Association (EMVA), as well as several international standards committees, including the OSIS (Optical Sensor Interface Standard) committee of ia.cmm. Go to press info

2017-08-18 Metromeet invites you to be part of the speaker panel for its 14th edition

 Metromeet invites you to be part of the speaker panel for its 14th edition
After ending the 13th edition of Metromeet with the constitution of a forum that will allow important representatives of the Industry to share developments and ideas about the QiF standard, Metromeet calls the metrology lovers and experts to share their knowledge in the 14th edition of Metromeet. Go to press info

2017-07-12 The Innovalia Group celebrates its 15th summer convention with the Carsarte awards

The Innovalia Group celebrates its 15th summer convention with the Carsarte awards
The Innovalia Group, a strategic alliance of technology-based companies, will celebrate this Friday, July 14, its 15th edition of its traditional summer convention in the Boat Building (101) placed in the Technological Park of Bizkaia in Zamudio. Go to press info

2017-06-14 30th anniversary of CARSA, the main and first company of the Innovalia Group

30th anniversary of CARSA, the main and first company of the Innovalia Group
CARSA was born at the end of the 80’s, when the Basque Country was going through an industrial and technological crisis. Go to press info

2017-06-05 Innovalia Metrology presents M3MH at the Subcontratación trade show on June 8th

Innovalia Metrology presents M3MH at the Subcontratación trade show on June 8th
On Thursday 8, at 12 pm, Innovalia Metrology invites you to the M3MH official presentation in its stand (5 / 1-13). Go to press info

2017-04-04 Innovalia Metrology presents M3 Hybrid at the Control-Stom in Poland on March 28, 29 and 30

Innovalia Metrology presents M3 Hybrid at the Control-Stom in Poland on March 28, 29 and 30
Innovalia Metrology joined the 23rd edition of the Industrial Measurement Technology Fair to present M3 Hybrid at the F-45 stand, one of the metrology solutions that deserves the 4.0 label and is contributing in a crucial way to discover the importance of metrology on the path to Industry 4.0 Go to press info

2017-03-29 The 13th edition of Metromeet constitutes an international discussion forum on the QIF standard.

The 13th edition of Metromeet constitutes an international discussion forum on the QIF standard.
Last Friday, March 24th, Metromeet came to its end after 3 days of speeches and networking. The international Conference ended with the constitution of a forum that will allow important representatives of the Industry to share developments and ideas about the QiF standard. Go to press info

2017-03-22 Innovalia Metrology, ambassador of Metrology 4.0 in Southern Manufacturing

 Innovalia Metrology, ambassador of Metrology 4.0 in Southern Manufacturing
Innovalia Metrology is able to adapt to different markets and evaluate the needs of each customer. The commitment to internationalization is solid and year after year, Innovalia Metrology has more partners that introduce M3 in different countries. Go to press info

2017-03-16 The 13th edition of Metromeet, International Conference on Industrial Metrology steps into Metrology

The 13th edition of Metromeet, International Conference on Industrial Metrology steps into Metrology
On March 22nd, 23rd and 24th, Innovalia Metrology will be an exhibitor at Metromeet, the International Conference on Industrial Metrology Go to press info

2017-03-06 Metrology 4.0 Solutions at INTEC and TECMA thanks to Innovalia Metrology

Metrology 4.0 Solutions at INTEC and TECMA thanks to Innovalia Metrology
Innovalia Metrology continues to cross borders, from the 7th to the 10th of March, Innovalia Metrology will present M3 Hybrid in both TECMA (Mexico) and INTEC (Germany). Go to press info

2017-02-01 A great beginning for Innovalia Metrology

A great beginning for Innovalia Metrology
It looks like 2017 will be a year of progress and development for Innovalia Metrology. The arrival in India and the consolidation of an official distributor in the country will enable the company to introduce metrology solutions for quality management. Go to press info

2017-01-18 Innovalia Metrology consolidates its presence in India

Innovalia Metrology consolidates its presence in India
Innovalia Metrology begins 2017 with a very anticipated exhibition at IMTEX. The IMTMA (Indian Machine Tool Manufacturer’s Association) is organizing the 18th edition of this exhibition at the Bangalore International Exhibition Center (BIEC). Go to press info