584,340 active members*
6,791 visitors online*
Register for free
Login Register
isel Germany AG - Banner
isel Germany AG Products

Successful with cnc technology!

isel Germany GmbH
Linear guide rails

Linear unit with toothed belt drive LEZ 3

characteristics -aluminium profile, miniature linear guide LFS-8-4 - backlash-free feed with toothed belt drive, toothed belt with 5 mm pitch, width 25 mm - Feed rate max. 5 m/s - Shaft slide WS3, L176xW130 mm - Feed per revolution: - 70 mm or 150 mm - Repeatability less than or equal to ± 0,2 mm - Limit or reference switch accuracy < 0.1 mm - available in lengths up to 6000 mm - Motor modules can be flange-mounted on the right and left travel: without motor, with shaft slide | profile length X -235 mm without motor, with carriage | profile length X -235 mm Guides and shaft slides also available in stainless steel !
Product details Homepage Product request
LINEAR UNIT LEZ 4G WITH TOOTHED BELT DRIVE
LINEAR UNIT LEZ 4G WITH TOOTHED BELT DRIVE
LINEAR UNITS
isel Germany GmbH
Linear guide rails

LINEAR UNIT LEZ 4G WITH TOOTHED BELT DRIVE


The completely enclosed drive unit has an internal roller guide with lifetime lubrication. It is fitted with a stainless steel cover as standard, which prevents the ingress of dirt and therefore guarantees a long service life. It also offers an impressive feed speed of up to 5 m/sec with a repeat accuracy of +/- 0.2 mm. The hollow shaft mounting enables fast and flexible motor adaptation for motors with a 60 mm flange. Optional planetary gearboxes are available for higher drive powers.

We look forward to receiving your inquiries and will be happy to support you with your projects.

FEATURES:

  • Stainless steel cover as standard
  • External limit switch sensors as standard
  • Repeat accuracy +/- 0.2 mm
  • Standard length up to 3 m
  • Feed per revolution 90 mm
  • Planetary gearbox 1:3
  • Direct motor adaptation via hollow shaft
  • Motor connection for flange 60 mm

OPTIONS
  • Special lengths and other reduction ratios on request
We look forward to your inquiries and will be happy to support you with your projects.
Product details Homepage Product request
LIinear Unit Configurator / Spindle Drive - LES 4
LIinear Unit Configurator / Spindle Drive - LES 4
Linear guide rail
isel Germany GmbH
Linear guide rails
Linear unit with spindle drive - LES 4 Features - Aluminium shaft slide WS 5/70.2 x WS 5/70 (70 mm long), adjustable without play, central lubrication - Aluminium shaft mounting profile width 75 x height 75 mm, natural anodised - Clamping surface and profile underside plane milling with 2 precision steel shaftsØ 12 h6, material Cf53,hardness 60 ± 2 HRC - Aluminium shaft slide WS 5/70.2 x WS 5/70 (70 mm long), adjustable without clearance, central lubrication - Ball screws with 2.5 / 4 / 5 / 10 / 20 mm pitch - Profile sealing Abrasion-resistant sealing lips - Die-cast aluminium end plates with 2 end or reference switches, repeat accuracy ± 0.02 mm Sealed angular contact ball bearingsin drive steel flange Traverse path at 1 x WS 5 / 70 = profile length (L1) - 150 mm at 2 x WS 5 / 70 = profile length (L1) - 280 mm Profile length (L1) from 290 mm to 2990 mm can be ordered in 100 mm increments! Maximum length up to 3490 mm and special lengths on request. Options - black anodised aluminium profile - Electromagnetic brake in the motor module or in the extension of the drive spindle - Steel slide LS2 (Art.-No. 223007) - External limit switch mounting kit (see accessories)
Product details Homepage Datasheet Product request
Linear Unit Configurator / Spindle Drives - LES5
Lineareinheit mit Spindelantri
Linear guide rail
isel Germany GmbH
Linear guide rails
Linear unit with spindle drive - LES 5 Features Aluminium shaft mounting profile B225 x H75 mm, natural anodised clamping surface and profile underside face milled with 4 precision steel shafts Ø 12 h6, material Cf53, hardness 60 ± 2 HRC Aluminium shaft slide WS 5/70, 2 x WS 5/70 (70 mm long), adjustable backlash-free, central lubrication Ball screws with 2.5 / 4 / 5 / 10 / 20 mm pitch Profile sealing by abrasion-resistant sealing lips Die-cast aluminium end plates with 2 limit or reference switches, repeat accuracy ± 0.02 mm Sealed angular contact ball bearings in the drive steel flange Traverse path at 2 x WS 5 / 70 = profile length (L1) - 150 mm at 4 x WS 5 / 70 = profile length (L1) - 280 mm Profile length (L1) from 290 mm to 2990 mm can be ordered in 100 mm increments! Maximum length up to 3490 mm and special lengths on request. Options black anodised aluminium profile electromagnetic brake Steel slide LS2 (Art.-No. 223007) Limit switch mounting kit (see accessories)
  • Linear UnitLES 5 with spindle
Product details Homepage Product request
Linear Unit Configurator / Spindle Drive- LES6
Linear Unit Configurator / Spindle Drive- LES6
Linear guide rail
isel Germany GmbH
Linear guide rails
Features Aluminium shaft mounting profile width 150 x height 75 mm, natural anodised Clamping surface and profile underside plane milling with 4 precision steel shafts Ø 12 h6, material Cf53,hardness 60 ± 2 HRC Aluminium shaft slide WS 5/70.2 x WS 5/70 (70 mm long), adjustable without clearance, central lubrication Ball screws with 2.5 / 4 / 5 / 10 / 20 mm pitch Profile sealing Abrasion-resistant sealing lips Die-cast aluminium end plates with 2 limit or reference switches, repeat accuracy ± 0.02 mm Sealed angular contact ball bearingsin drive steel flange Traverse path at 2 x WS 5 / 70 = profile length (L1) - 150 mm at 4 x WS 5 / 70 = profile length (L1) - 280 mm Profile length (L1) from 290 mm to 2990 mm can be ordered in 100 mm increments! Options black anodised aluminium profile electromagnetic brake Steel slide LS2 Limit switch mounting kit On request length measuring system bellows cover Mounting on the left side of the motor module
Product details Homepage Product request
ILE 20/20 for increased payloads and feed forces
ILE 20/20 for increased payloads and feed forces
Linear guide rail
isel Germany GmbH
Linear guide rails
238 xxx xxxx
705 cm4
2807 cm
39,4 mm
54,22 cm²
EN AW-6060 T66
e6/eV1
20,6 kg/m
22,8 kg/m
- Spindle pitch p 5 / 10 / 20 mm - available with one or two integrated ball screw drives! - Profile lengths 290 mm to 2990 mm in 100 mm steps - 2, 4, 6 or 8 steel slides - compatible to the LES predecessor The linear unit iLE 20/20 is based on a sophisticated linear technology, which has been permanently developed further through many years of experience and numerous specific customer requirements. Customer wishes and experience from the service fields have been incorporated as product developments. This enables us to offer a suitable linear system for every application and to design tailor-made solutions for individual customer requirements. The linear units are available with one or two integrated ball screw drives (Ø 20 mm), pitches* of optionally 5/10/20/40 mm and with 2, 4, 6 or 8 steel slides with aluminium clamping plates. (* currently only 5 mm available) Profile lengths 290 mm to 2990 mm in 100 mm steps available! Features highly rigid and high-precision drive unit with smallest dimensions high load capacities, high precision and high rigidity due to integrated profiled rail guide high positioning and repeat accuracy due to ball screw with backlash-free nut system high traversing speeds with simultaneous high precision due to ball rail systems, large spindle diameters and pitches Options Stepper or servo motor external limit switches Energy Chains® Fasteners Bellows
Product details Homepage Product request
Linear unit with toothed belt drive LEZ 1
Linear unit with toothed belt drive LEZ 1
Linear guide rail
isel Germany GmbH
Linear guide rails
232005 xxxx
HTD 3M, Breite 9 mm
0,430 kg
1000 mm ^= 3 kg
0,0225 kg/m
1,03 kg
0,200 kg/100 mm
Ø 19,1 mm
5,585·10-6 kgm2
60 mm
Lowest price, simplest & narrowest axis, guided on both sides, on request up to 6,000 mm - Aluminium profile, miniature linear guide LFS-8-2 - backlash-free feed with toothed belt drive - Special lengths in 100 mm grid on request, max. 6000 mm - Mounting via integrated threaded rail M6, grid 50 mm travel: without motor, with shaft slide | profile length X -150 mm without motor, with carriage | profile length X -131 mm Options: Special lengths in 100 mm grid on request, max. 6000 mm Mounting via integrated threaded rail M6, grid 50 mm guideways and shaft slides also available in stainless steel !
Product details Homepage Product request
Linear unit with toothed belt drive LEZ 2
Linear unit with toothed belt drive LEZ 2
Linear guide rail
isel Germany GmbH
Linear guide rails
Flat axis, mounting from above possible, length up to 6,000 mm characteristics - Aluminium profile, with miniature linear guide LFS-8-5 - backlash-free feed with toothed belt drive - Timing belt with 5 mm pitch, width 25 mm - Feed rate max. 5 m/s - Shaft slide WS 3, L 176 x W 130 mm - Feed per revolution: 70 mm - Repeatability - less than or equal to ± 0,2 mm - Limit or reference switch accuracy < 0.1 mm - available in lengths up to 6000 mm travel: - without motor, with shaft slide | profile length X -235 mm - without motor, with carriage | profile length X -235 mm Guides and shaft slides also available in stainless steel ! Translated with DeepL
Product details Homepage Product request
LINEAR GUIDES PSF 15
LINEAR GUIDES PSF 15
Linear guide rail
isel Germany GmbH
Linear guide rails
LINEAR GUIDES PSF 15
PSF - profile rail guide and PSS - profile rail slide A = Compact design H = High version Carriage width: F-flange design | M-flange design Carriage length; S-short version | N-normal version | L-long version FS = flange, short version FN = flange, normal design FL = flange, long version MS = Narrow version, short version MN = Narrow version, normal version ML = Narrow version, long version
Product details Homepage Product request
LINEAR GUIDES PSF 20
LINEAR GUIDES PSF 20
Linear guide rail
isel Germany GmbH
Linear guide rails
LINEAR GUIDES PSF 20
PSF - profile rail guide and PSS - profile rail slide ARC = Compact design HRC/ERC = High version Carriage width: F-flange design | M-flange design Carriage length; S-short version | N-normal version | L-long version FS = flange, short version FN = flange, normal design FL = flange, long version MS = Narrow Ahttps://de.industryarena.com/isel/dashboard/products/create?category_id=1109#enusführung, short version MN = Narrow version, normal version ML = Narrow version, long version
Product details Homepage Product request
LINEAR GUIDES PSF 25
LINEAR GUIDES PSF 25
Linear guide rail
isel Germany GmbH
Linear guide rails
LINEAR GUIDES PSF 25
PSF - profile rail guide and PSS - profile rail slide A = Compact design H = High version Carriage width: F-flange design | M-flange design Carriage length; S-short version | N-normal version | L-long version FS = flange, short version FN = flange, normal design FL = flange, long version MS = Narrow version, short version MN = Narrow version, normal version ML = Narrow version, long version
Product details Homepage Product request
LINEAR GUIDES PSF 30
LINEAR GUIDES PSF 30
Linear guide rail
isel Germany GmbH
Linear guide rails
LINEAR GUIDES PSF 30
PSF - Profile rail guide and PSS - Profile rail slide A = Compact design H= High version Carriage width: F-flange design | M-flange design Carriage length; S short version | N normal version | L long Design FS = flange, short version FN = flange, normal design FL = flange, long version MS = Narrow version, short version MN = Narrow version, normal version ML = Narrow version, long version
Product details Homepage Product request