Machine Mounting Systems FEDAM can be used both for::
- Source insulation (emission protection): Forces emitted by a machine or plant are transmitted in a reduced form to the environment.
and for:
- Receiver insulation (immission protection): Vibrations existing at the place of installation, given as vibratory distances, speeds or accelerations, are transmitted in a reduced form to the machine or plant.
Top and bottom side: delivery with Anti-Slip Panels GPL 3025 ex works
If desired without anti-slip panel, in this case we recommend screwing on of the elements to the machine and the floor, due to the missing anti-slip protection.
You can see more types of our Spring-Damper-System FEDAM at our website, please use the link product details.
isoloc Machine Mounting Systems MULTIDAM® (pat.) - high stability in all space directions
- For highest demands.
- For source and receiver insulation.
- For the damping of vibrations and impacts, which have a simultaneous effect in all spatial directions.
- Absorption of vertical and horizontal loads as well as dynamic forces.
- Effect: very effective vibration insulation, especially for machines with high dynamic mass forces.
Advantages:
- Adjustable dynamic properties.
- Approximately equal vertical and horizontal stiffness.
- Very high damping (up to 30 %), optimal insulation of vibrations, structure-borne noises and impacts.
- Free or solid setup in connection with the isoloc UMS system.
- Calm posture of the machine.
- Higher productivity of machine tools by higher accelerations, jerk and KV.
- Better dimension accuracy.
- Better surface quality.
- Less wear of machine and tools.
Equipment:
Top side: delivery with Anti-Slip Panels GPL 3025 ex works.
Inner side: please select the desired equipment with Vibration Insulation Panels IPL or Vibration Insulation Packs IPK.
Due to its very good elasticity and damping, this type is optimally suitable for the source and receiver insulation of machines and devices of all kinds, also on upper floors and for sprung foundations.
Thanks to its high damping it is particularly suited for the insulation of impacts as the inevitable excessive resonance increases are reduced and vibrations fade quickly. Very deep natural frequencies when arranged in layers.
Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.
Compressive stress
0.1 N/mm² to 0.3 N/mm²
Friction coefficient
on steel up to 0.95
on concrete up to 0.90
- Preferably for machines which can be installed in a fixing-free manner.
- Because of the modular construction concept the levelling bolts can be used in various ways.
isoloc Levelling Elements NTE
- Effective vibration and structure-borne noise insulation as well as reduction of noise.
- Especially for smaller and lighter machines.
- Equalization of tilts of up to 3º - 5°.
- NTE made of stainless steel are very flat.
- Used in the chemical industry or food industry and anywhere, where corrosion resistance is an important factor.
- Flat construction.
- Precision levelling by means of fine thread or standard thread made of stainless steel.
Equipment:
With vibration insulation panels or vibration insulation packs in accordance to the vibration requirements.
System Advantage - spherical shape
- Better dispersion of impact-like axial forces through a geometrically larger supporting surface with the bolt.
- Advantage: No notch effect - as is the case with cone-shaped screw tips.
Scope of Delivery:
The element requires always an isoloc levelling bolt. Please indicate the required bolt size and length while placing your order.
You can see more types of our Levelling Discs NTE at our website, please use the link product details.
- Preferably for machines which can be installed in a fixing-free manner.
- Because of the modular construction concept the levelling bolts can be used in various ways.
isoloc Levelling Elements NTS
- For the fixing-free setup, preferably of smaller and moderately heavy machines.
- Provide all advantages of the vibration and structure-borne noise insulation.
- Fast and technically simple level equalization in case of tilts of up to 5º.
- Mounting advantage due to the round construction, no alignment required.
- Precision levelling by means of a fine thread or standard thread screw.
Simple Connection
The levelling bolt and the levelling disc are connected with each other in an undetachable way thanks to a very easy system.
Advantages:
A repositioning of the machine can be carried out in an absolutely trouble-free manner, as the whole levelling disc remains at the foot of the machine while the machine is lifted.
Scope of Delivery:
The element requires always an isoloc levelling bolt. Please indicate the required bolt size and length while placing your order.
You can see more types of our Levelling Discs NTS at our website, please use the link product details.
- Preferably for machines which can be installed in a fixing-free manner.
- Because of the modular construction concept the levelling bolts can be used in various ways.
isoloc Levelling Elements NTSE
- For the fixing-free setup, preferably of smaller and moderately heavy machines.
- Provide all advantages of the vibration and structure-borne noise insulation.
- Fast and technically simple level equalization in case of tilts of up to 5º.
- Mounting advantage due to the round construction, no alignment required.
- Precision levelling by means of a fine thread or standard thread screw.
- Especially for the use in the food industry and chemical industry.
Simple Connection
The levelling bolt and the levelling disc are connected with each other in an undetachable way thanks to a very easy system.
Advantages:
A repositioning of the machine can be carried out in an absolutely trouble-free manner, as the whole levelling disc remains at the foot of the machine while the machine is lifted.
Scope of Delivery:
The element requires always an isoloc levelling bolt. Please indicate the required bolt size and length while placing your order.
You can see more types of our Levelling Discs NTSE at our website, please use the link product details.
ISOLOC UMS MACHINE SHOES STEEL LINE MADE OF FORGED STEEL AND WITH INCLINED RUNNING SURFACES
The new patented Universal Precision Machine Shoes made of forged steel are the consequent development due to steadily increased requirements in the machine-tool manufacturing. Due to the patented construction, which differs from all other levelling shoes, even heaviest loads can be levelled very precisely at the same time, at smaller external dimensions. The running surfaces, inclined by 15°, ensure zero play and excellent power transmission to the foundation respectively on our highly absorbing vibration insulation panels due to the double stiffness to comparable elements of cast iron.
Screw-on machine shoe with inclination compensation. For a stable positioning in inclined floors or uneven machine footprint. The ball ring enables a stress-free compensation of floor unevenness of up to 3°. The top side will be equipped with vibration insulation panels. The machine shoe must be anchored with the machine after levelling.
ISOLOC UMS MACHINE SHOES STEEL LINE MADE OF FORGED STEEL AND WITH INCLINED RUNNING SURFACES
The new patented Universal Precision Machine Shoes made of forged steel are the consequent development due to steadily increased requirements in the machine-tool manufacturing. Due to the patented construction, which differs from all other levelling shoes, even heaviest loads can be levelled very precisely at the same time, at smaller external dimensions. The running surfaces, inclined by 15°, ensure zero play and excellent power transmission to the foundation respectively on our highly absorbing vibration insulation panels due to the double stiffness to comparable elements of cast iron.
Through-bore machine shoe for floor anchoring of the machine with inclination compensation. For a stable positioning of the machine even on an uneven floor. The machine must be anchored to the floor through the machine foot after levelling. A vibration decoupling of the screw takes place by our insulation discs RONKAP. The bottom side will be equipped with a vibration insulation panel.
ISOLOC UMS MACHINE SHOES STEEL LINE MADE OF FORGED STEEL AND WITH INCLINED RUNNING SURFACES
The new patented Universal Precision Machine Shoes made of forged steel are the consequent development due to steadily increased requirements in the machine-tool manufacturing. Due to the patented construction, which differs from all other levelling shoes, even heaviest loads can be levelled very precisely at the same time, at smaller external dimensions. The running surfaces, inclined by 15°, ensure zero play and excellent power transmission to the foundation respectively on our highly absorbing vibration insulation panels due to the double stiffness to comparable elements of cast iron.
Through-bore for floor anchoring of the machine or free-standing use possible. The top side is delivered with a non-skid panel GPL 3025; the bottom side is equipped with a vibration insulation panel. Screw and RONKAP element can be ordered separately.
ISOLOC UMS MACHINE SHOES STEEL LINE MADE OF FORGED STEEL AND WITH INCLINED RUNNING SURFACES
The new patented Universal Precision Machine Shoes made of forged steel are the consequent development due to steadily increased requirements in the machine-tool manufacturing. Due to the patented construction, which differs from all other levelling shoes, even heaviest loads can be levelled very precisely at the same time, at smaller external dimensions. The running surfaces, inclined by 15°, ensure zero play and excellent power transmission to the foundation respectively on our highly absorbing vibration insulation panels due to the double stiffness to comparable elements of cast iron.
Through-bore machine shoe, which must be used with a floor anchoring. It is recommended for a pure compensation of the height of the machine, since it does not provide any vibration insulation. The machine shoe must be anchored or grouted after levelling.
ISOLOC UMS MACHINE SHOES STEEL LINE MADE OF FORGED STEEL AND WITH INCLINED RUNNING SURFACES
The new patented Universal Precision Machine Shoes made of forged steel are the consequent development due to steadily increased requirements in the machine-tool manufacturing. Due to the patented construction, which differs from all other levelling shoes, even heaviest loads can be levelled very precisely at the same time, at smaller external dimensions. The running surfaces, inclined by 15°, ensure zero play and excellent power transmission to the foundation respectively on our highly absorbing vibration insulation panels due to the double stiffness to comparable elements of cast iron.
Through-bore machine shoe, which must be used by floor anchoring. It is recommended for a pure height compensation of the machine since it does not provide any vibration insulation. With inclination compensation to compensate floor inclinations or uneven machine feet. The machine shoe must be anchored after levelling.
ISOLOC UMS MACHINE SHOES STEEL LINE MADE OF FORGED STEEL AND WITH INCLINED RUNNING SURFACES
The new patented Universal Precision Machine Shoes made of forged steel are the consequent development due to steadily increased requirements in the machine-tool manufacturing. Due to the patented construction, which differs from all other levelling shoes, even heaviest loads can be levelled very precisely at the same time, at smaller external dimensions. The running surfaces, inclined by 15°, ensure zero play and excellent power transmission to the foundation respectively on our highly absorbing vibration insulation panels due to the double stiffness to comparable elements of cast iron.
Screw-on machine shoe with inclination compensation. For a stable positioning in inclined floors or uneven machine footprints. The ball ring enables a stress-free compensation of floor unevenness of up to 3°. The bottom side will be equipped with vibration insulation panels. The machine shoe must be anchored with the machine after levelling.
ISOLOC UMS MACHINE SHOES STEEL LINE MADE OF FORGED STEEL AND WITH INCLINED RUNNING SURFACES
The new patented Universal Precision Machine Shoes made of forged steel are the consequent development due to steadily increased requirements in the machine-tool manufacturing. Due to the patented construction, which differs from all other levelling shoes, even heaviest loads can be levelled very precisely at the same time, at smaller external dimensions. The running surfaces, inclined by 15°, ensure zero play and excellent power transmission to the foundation respectively on our highly absorbing vibration insulation panels due to the double stiffness to comparable elements of cast iron.
Centric through-bore machine shoe for floor anchoring of the machine with inclination compensation. For a stable positioning of the machine even on an uneven floor. The machine must be anchored with the floor through the machine foot after levelling. A vibration decoupling of the screw takes place by our insulation discs RONKAP. The bottom side will be equipped with a vibration insulation panel.
ISOLOC UMS MACHINE SHOES STEEL LINE MADE OF FORGED STEEL AND WITH INCLINED RUNNING SURFACES
The new patented Universal Precision Machine Shoes made of forged steel are the consequent development due to steadily increased requirements in the machine-tool manufacturing. Due to the patented construction, which differs from all other levelling shoes, even heaviest loads can be levelled very precisely at the same time, at smaller external dimensions. The running surfaces, inclined by 15°, ensure zero play and excellent power transmission to the foundation respectively on our highly absorbing vibration insulation panels due to the double stiffness to comparable elements of cast iron.
Centric through-bore for floor anchoring of the machine or free-standing use possible. The top side will be delivered with a non-skid panel GPL 3025; the bottom side will be equipped with a vibration insulation panel. Screw and RONKAP element can be ordered separately.
ISOLOC UMS MACHINE SHOES STEEL LINE MADE OF FORGED STEEL AND WITH INCLINED RUNNING SURFACES
The new patented Universal Precision Machine Shoes made of forged steel are the consequent development due to steadily increased requirements in the machine-tool manufacturing. Due to the patented construction, which differs from all other levelling shoes, even heaviest loads can be levelled very precisely at the same time, at smaller external dimensions. The running surfaces, inclined by 15°, ensure zero play and excellent power transmission to the foundation respectively on our highly absorbing vibration insulation panels due to the double stiffness to comparable elements of cast iron.
Centric through-bore machine shoe, which must be used by floor anchoring. It is recommended for a pure compensation of the height of the machine, since it does not provide any vibration insulation. The machine shoe must be anchored after levelling.
ISOLOC UMS MACHINE SHOES STEEL LINE MADE OF FORGED STEEL AND WITH INCLINED RUNNING SURFACES
The new patented Universal Precision Machine Shoes made of forged steel are the consequent development due to steadily increased requirements in the machine-tool manufacturing. Due to the patented construction, which differs from all other levelling shoes, even heaviest loads can be levelled very precisely at the same time, at smaller external dimensions. The running surfaces, inclined by 15°, ensure zero play and excellent power transmission to the foundation respectively on our highly absorbing vibration insulation panels due to the double stiffness to comparable elements of cast iron.
Centric through-bore machine shoe, which must be used by floor anchoring. It is recommended for a pure height compensation of the machine since it does not provide any vibration insulation. With inclination compensation to compensate floor inclinations or uneven machine bases. The machine shoe must be anchored after levelling.
Very good vibration and structure-borne sound insulation for machine installations and for sprung foundations. Also for source insulation of small and middle-sized presses.
Deep natural frequencies when arranged in layers.
Very high static friction coefficients permit a free and non-anchored machine installation, also on concrete and steel.
Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.
Compressive stress
0.1 N/mm² to 0.5 N/mm²
Friction coefficient
on steel up to 0.60
on concrete up to 0.77
Heavy duty vibration insulation panel. High elasticity, low natural frequencies.
The non-linear, dynamic characteristic at 0.8 N/mm² and constant natural frequency lead to a very favourable vibration behaviour in case of changing loads.
For source insulation of machines, presses and equipment of all kind.
Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.
Compressive stress
0.8 N/mm² to 2.0 N/mm²
Friction coefficient
on steel up to 0.60
on concrete up to 0.77
For source, recipient and structure-borne sound insulation as well as vibration damping of machines of all kind.
The good slipping protection assures a safe machine standing on concrete and steel and permits a free, non-anchored machine installation.
Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.
Compressive stress
0.4 N/mm² to 1.2 N/mm²
Friction coefficient
on steel up to 1.34
on concrete up to 1.04
For recipient and structure-borne sound insulation and, above all, for vibration damping of machine tools and machining centres.
The good slipping protection assures a safe machine standing on concrete and steel and permits a free and non-anchored machine installation.
Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.
Compressive stress
0.4 N/mm² to 1.2 N/mm²
Friction coefficient
on steel up to 1.34
on concrete up to 1.04
Excellent damping qualities and high load-bearing capacity. For source insulation of presses, punches, shears and cutting machines.
Basic dimension: 500 x 500 x 25 mm
Special dimensions and customized cuttings are possible.
Compressive stress:
0.4 N/mm² to 1.7 N/mm²
Friction coefficient:
on steel up to 1.34
on concrete up to 1.04
The special fibre cross-linking meets the highest requirements with regard to level retention (crawling) and load-bearing capacity.
Favourable relation of the vertical and horizontal natural stiffness guarantees a "calm" machine standing.
The non-linear dynamic properties assure constant vibration behaviour of the machine, even in case of differing compressive stress on the bearing points.
Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.
Compressive stress
1.0 N/mm² to 5.0 N/mm²
Friction coefficient
on steel up to 0.95
on concrete up to 1.30
For structure-borne sound insulation of machines and plants. Due to high load-bearing capacity and very low construction height particularly economical.
The special IPL40-V1 version is also approved for machine installations in the food industry. Please contact us.
Basic dimension: 500 x 500 x 8 mm
Special dimensions and customized cuttings are possible.
Compressive stress
0.8 N/mm² to 2.0 N/mm²
Friction coefficient
on steel up to 1.48
on concrete up to 1.24
isoloc Machine Mounting Systems MULTIDAM® (pat.) - high stability in all space directions
- For highest demands.
- For source and receiver insulation.
- For the damping of vibrations and impacts, which have a simultaneous effect in all spatial directions.
- Absorption of vertical and horizontal loads as well as dynamic forces.
- Effect: very effective vibration insulation, especially for machines with high dynamic mass forces.
Advantages:
- Adjustable dynamic properties.
- Approximately equal vertical and horizontal stiffness.
- Very high damping (up to 30 %), optimal insulation of vibrations, structure-borne noises and impacts.
- Free or solid setup in connection with the isoloc UMS system.
- Calm posture of the machine.
- Higher productivity of machine tools by higher accelerations, jerk and KV.
- Better dimension accuracy.
- Better surface quality.
- Less wear of machine and tools.
Equipment:
Top side: delivery with Anti-Slip Panels GPL 3025 ex works.
Inner side: please select the desired equipment with Vibration Insulation Panels IPL or Vibration Insulation Packs IPK.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.