491,361 active members
9,983 visitors online
Register for free
Login Register
isoloc - Banner
isoloc Products
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
UMS5-KDS
60000
110
110
50
-
+5/-4
145
13
36
55
22
22
-
17
KDS - through-hole for anchoring the machine to the floor, without vibration insulation

- No vibration insulation - therefore recommended if only a height compensation of the machine is required.
- Has to be used with anchoring to the floor.

Equipment:
none

You can see more sizes of our Machine Shoe UMS-KDS at our website, please use the link product details.
Product details Homepage Product request
MULTIDAM MD+UMS isoloc Machine Mounting Systems MULTIDAM®
MULTIDAM MD+UMS isoloc Machine Mounting Systems MULTIDAM®
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
isoloc Machine Mounting Systems MULTIDAM® (pat.) - high stability in all space directions

- For highest demands.
- For source and receiver insulation.
- For the damping of vibrations and impacts, which have a simultaneous effect in all spatial directions.
- Absorption of vertical and horizontal loads as well as dynamic forces.
- Effect: very effective vibration insulation, especially for machines with high dynamic mass forces.

Advantages:

- Adjustable dynamic properties.
- Approximately equal vertical and horizontal stiffness.
- Very high damping (up to 30 %), optimal insulation of vibrations, structure-borne noises and impacts.
- Free or solid setup in connection with the isoloc UMS system.
- Calm posture of the machine.
- Higher productivity of machine tools by higher accelerations, jerk and KV.
- Better dimension accuracy.
- Better surface quality.
- Less wear of machine and tools.

Equipment:
Top side: delivery with Anti-Slip Panels GPL 3025 ex works.
Inner side: please select the desired equipment with Vibration Insulation Panels IPL or Vibration Insulation Packs IPK.
Product details Homepage Product request
IPL 6
IPL 6
Vibrration isolation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
IPL 6
500 x 500 x 15
75000
0.95
0.9
profile on both sides
Due to its very good elasticity and damping, this type is optimally suitable for the source and receiver insulation of machines and devices of all kinds, also on upper floors and for sprung foundations.

Thanks to its high damping it is particularly suited for the insulation of impacts as the inevitable excessive resonance increases are reduced and vibrations fade quickly. Very deep natural frequencies when arranged in layers.

Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.

Compressive stress
0.1 N/mm² to 0.3 N/mm²

Friction coefficient

on steel up to 0.95
on concrete up to 0.90
  • IPL 6
Levelling Discs NTE in stainless steel
Levelling Discs NTE in stainless steel
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
NTE100/30
20000
100
106
26
6
1.5
- Preferably for machines which can be installed in a fixing-free manner.
- Because of the modular construction concept the levelling bolts can be used in various ways.

isoloc Levelling Elements NTE

- Effective vibration and structure-borne noise insulation as well as reduction of noise.
- Especially for smaller and lighter machines.
- Equalization of tilts of up to 3º - 5°.
- NTE made of stainless steel are very flat.
- Used in the chemical industry or food industry and anywhere, where corrosion resistance is an important factor.
- Flat construction.
- Precision levelling by means of fine thread or standard thread made of stainless steel.

Equipment:

With vibration insulation panels or vibration insulation packs in accordance to the vibration requirements.

System Advantage - spherical shape

- Better dispersion of impact-like axial forces through a geometrically larger supporting surface with the bolt.
- Advantage: No notch effect - as is the case with cone-shaped screw tips.

Scope of Delivery:

The element requires always an isoloc levelling bolt. Please indicate the required bolt size and length while placing your order.

You can see more types of our Levelling Discs NTE at our website, please use the link product details.
  • Levelling Disc NTE50
  • Levelling Disc NTE80
  • Levelling Disc NTE100
  • Levelling Disc NTE160
  • Levelling Disc NTE
Product details Homepage Product request
Levelling Discs NTS
Levelling Discs NTS
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
Levelling Discs NTS
NTS100/30
20000
100
106
35
- Preferably for machines which can be installed in a fixing-free manner.
- Because of the modular construction concept the levelling bolts can be used in various ways.

isoloc Levelling Elements NTS

- For the fixing-free setup, preferably of smaller and moderately heavy machines.
- Provide all advantages of the vibration and structure-borne noise insulation.
- Fast and technically simple level equalization in case of tilts of up to 5º.
- Mounting advantage due to the round construction, no alignment required.
- Precision levelling by means of a fine thread or standard thread screw.

Simple Connection

The levelling bolt and the levelling disc are connected with each other in an undetachable way thanks to a very easy system.

Advantages:
A repositioning of the machine can be carried out in an absolutely trouble-free manner, as the whole levelling disc remains at the foot of the machine while the machine is lifted.

Scope of Delivery:

The element requires always an isoloc levelling bolt. Please indicate the required bolt size and length while placing your order.

You can see more types of our Levelling Discs NTS at our website, please use the link product details.
  • Levelling Disc NTS50
  • Levelling Disc NTS100
  • Levelling Disc NTS150
  • Levelling Disc NTS300
Product details Homepage Product request
Levelling Discs NTSE in stainless steel
Levelling Discs NTSE in stainless steel
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
NTSE100/30
20000
100
106
35
- Preferably for machines which can be installed in a fixing-free manner.
- Because of the modular construction concept the levelling bolts can be used in various ways.

isoloc Levelling Elements NTSE

- For the fixing-free setup, preferably of smaller and moderately heavy machines.
- Provide all advantages of the vibration and structure-borne noise insulation.
- Fast and technically simple level equalization in case of tilts of up to 5º.
- Mounting advantage due to the round construction, no alignment required.
- Precision levelling by means of a fine thread or standard thread screw.
- Especially for the use in the food industry and chemical industry.

Simple Connection

The levelling bolt and the levelling disc are connected with each other in an undetachable way thanks to a very easy system.

Advantages:
A repositioning of the machine can be carried out in an absolutely trouble-free manner, as the whole levelling disc remains at the foot of the machine while the machine is lifted.

Scope of Delivery:

The element requires always an isoloc levelling bolt. Please indicate the required bolt size and length while placing your order.

You can see more types of our Levelling Discs NTSE at our website, please use the link product details.
  • Levelling Disc NTSE50
  • Levelling Disc NTSE100
  • Levelling Disc NTSE150
  • Levelling Disc NTSE
Product details Homepage Product request
IPL 10
IPL 10
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
IPL 10
500 x 500 x 15
125000
0.60
0.77
profile on both sides
Very good vibration and structure-borne sound insulation for machine installations and for sprung foundations. Also for source insulation of small and middle-sized presses.

Deep natural frequencies when arranged in layers.

Very high static friction coefficients permit a free and non-anchored machine installation, also on concrete and steel.

Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.

Compressive stress
0.1 N/mm² to 0.5 N/mm²
Friction coefficient

on steel up to 0.60
on concrete up to 0.77
Product details Homepage Product request
IPL 17
IPL 17
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
IPL 17
500 x 500 x 15
500000
0.60
0.77
profile on both sides
Heavy duty vibration insulation panel. High elasticity, low natural frequencies.

The non-linear, dynamic characteristic at 0.8 N/mm² and constant natural frequency lead to a very favourable vibration behaviour in case of changing loads.

For source insulation of machines, presses and equipment of all kind.

Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.

Compressive stress
0.8 N/mm² to 2.0 N/mm²

Friction coefficient
on steel up to 0.60
on concrete up to 0.77
Product details Homepage Product request
IPL 20
IPL 20
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
IPL 20
500 x 500 x 15
300000
1.34
1.04
profile on both sides
For source, recipient and structure-borne sound insulation as well as vibration damping of machines of all kind.

The good slipping protection assures a safe machine standing on concrete and steel and permits a free, non-anchored machine installation.

Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.

Compressive stress
0.4 N/mm² to 1.2 N/mm²
Friction coefficient

on steel up to 1.34
on concrete up to 1.04

Product details Homepage Product request
IPL 20-2
IPL 20-2
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
IPL 20-2
500 x 500 x 15
300000
1.34
1.04
without profile
For recipient and structure-borne sound insulation and, above all, for vibration damping of machine tools and machining centres.

The good slipping protection assures a safe machine standing on concrete and steel and permits a free and non-anchored machine installation.

Basic dimension: 500 x 500 x 15 mm

Special dimensions and customized cuttings are possible.

Compressive stress
0.4 N/mm² to 1.2 N/mm²

Friction coefficient

on steel up to 1.34
on concrete up to 1.04

Product details Homepage Product request
IPL 25
IPL 25
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
IPL 25
500 x 500 x 25
425000
1.34
1.04
profile on both sides
Excellent damping qualities and high load-bearing capacity. For source insulation of presses, punches, shears and cutting machines.

Basic dimension: 500 x 500 x 25 mm

Special dimensions and customized cuttings are possible.

Compressive stress:
0.4 N/mm² to 1.7 N/mm²

Friction coefficient:
on steel up to 1.34
on concrete up to 1.04

Product details Homepage Product request
IPL 30
IPL 30
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
IPL 30
500 x 500 x 15
1250000
0.95
1.30
without profile
The special fibre cross-linking meets the highest requirements with regard to level retention (crawling) and load-bearing capacity.

Favourable relation of the vertical and horizontal natural stiffness guarantees a "calm" machine standing.

The non-linear dynamic properties assure constant vibration behaviour of the machine, even in case of differing compressive stress on the bearing points.

Basic dimension: 500 x 500 x 15 mm
Special dimensions and customized cuttings are possible.

Compressive stress
1.0 N/mm² to 5.0 N/mm²
Friction coefficient

on steel up to 0.95
on concrete up to 1.30
Product details Homepage Product request
IPL 40
IPL 40
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
IPL 40
500 x 500 x 8
500000
1.48
1.24
without profile
For structure-borne sound insulation of machines and plants. Due to high load-bearing capacity and very low construction height particularly economical.

The special IPL40-V1 version is also approved for machine installations in the food industry. Please contact us.

Basic dimension: 500 x 500 x 8 mm
Special dimensions and customized cuttings are possible.

Compressive stress
0.8 N/mm² to 2.0 N/mm²

Friction coefficient

on steel up to 1.48
on concrete up to 1.24
Product details Homepage Product request
FEDAM Spring-Damper-System
FEDAM Spring-Damper-System
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
FEDAM Spring-Damper-System
FEDAM-1-3.0-A03
150 - 1800
140 x 110
154
9 - 4
3 - 45
45
0.03 - 0.10
yes
Machine Mounting Systems FEDAM can be used both for::

- Source insulation (emission protection): Forces emitted by a machine or plant are transmitted in a reduced form to the environment.

and for:

- Receiver insulation (immission protection): Vibrations existing at the place of installation, given as vibratory distances, speeds or accelerations, are transmitted in a reduced form to the machine or plant.

Top and bottom side: delivery with Anti-Slip Panels GPL 3025 ex works

If desired without anti-slip panel, in this case we recommend screwing on of the elements to the machine and the floor, due to the missing anti-slip protection.

You can see more types of our Spring-Damper-System FEDAM at our website, please use the link product details.
  • FEDAM 1
Machine Mounting System MULTIDAM MD-2axis
Machine Mounting System MULTIDAM MD-2axis
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
isoloc Machine Mounting Systems MULTIDAM® (pat.) - high stability in all space directions

- For highest demands.
- For source and receiver insulation.
- For the damping of vibrations and impacts, which have a simultaneous effect in all spatial directions.
- Absorption of vertical and horizontal loads as well as dynamic forces.
- Effect: very effective vibration insulation, especially for machines with high dynamic mass forces.

Advantages:

- Adjustable dynamic properties.
- Approximately equal vertical and horizontal stiffness.
- Very high damping (up to 30 %), optimal insulation of vibrations, structure-borne noises and impacts.
- Free or solid setup in connection with the isoloc UMS system.
- Calm posture of the machine.
- Higher productivity of machine tools by higher accelerations, jerk and KV.
- Better dimension accuracy.
- Better surface quality.
- Less wear of machine and tools.

Equipment:
Top side: delivery with Anti-Slip Panels GPL 3025 ex works.
Inner side: please select the desired equipment with Vibration Insulation Panels IPL or Vibration Insulation Packs IPK.
  • MULTIDAM MD-2axis
  • MULTIDAM MD-2axis
  • MULTIDAM MD-2axis
  • MULTIDAM MD-2axis
Product details Homepage Product request
Levelling Discs NT
Levelling Discs NT
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
Levelling Discs NT
NT100/30
20000
100
106
31
6
1.5
- Preferably for machines which can be installed in a fixing-free manner.
- Because of the modular construction concept the levelling bolts can be used in various ways.

isoloc Levelling Elements NT

- Effective vibration and structure-borne noise insulation as well as reduction of noise.
- Especially for smaller and lighter machines.
- Equalization of tilts of up to 3º - 5°.
- Special installation advantage: No troublesome "aligning" to the edge of the machine pedestal required as is the case for rectangular elements.The round isoloc levelling disc fits always!

Equipment:

With vibration insulation panels or vibration insulation packs in accordance to the vibration requirements.

System Advantage - spherical shape

- Better dispersion of impact-like axial forces through a geometrically larger supporting surface with the bolt.
- Advantage: No notch effect - as is the case with cone-shaped screw tips.

Scope of Delivery

The element requires always an isoloc levelling bolt. Please indicate the required bolt size and length while placing your order.

You can see more types of our Levelling Discs NT at our website, please use the link product details.
  • Levelling Disc NT50
  • Levelling Disc NT80
  • Levelling Disc NT100
  • Levelling Disc NT160
Product details Homepage Product request
UMS/SL-ASF Steel Line
UMS/SL-ASF Steel Line
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
UMS/SL-ASF Steel Line
UMS8/SL-ASF/30
60000
110
110
56
74
+7/-3
145
13.5
36
55
M16
22
-
22
ISOLOC TO THE MACHINE BOOTS STEEL LINE FROM FORGED STEEL AND WITH
SLOPING surfaces the new patented universal­ precision machine shoes made of forged steel are the consistent further development due to steadily increasing requirements from the machine tool. The patented design, which is unterschei­det by all other leveling shoes, even the heaviest loads, at the same time smaller exterior dimensions, can be very precise level. Inclined surfaces ensure clearance 15 ° and zu­sammen with the, excellent power transmission to the Foundation or our highly absorbing double high rigidity compared to comparable elements made of cast, Schwingungsisolierplatten.

Bolt-on or free-standing execution possible. On request with base widening plate BV for special requirements such as a very high dynamics in a machine or to reduce the surface pressure on the ground. A GPL 3025 anti-skid plate is located on the top and on the bottom of a Schwingungsisolierplatte.
This description was translated from German to English by "Bing Translator".
  • UMS/SL-ASF
Product details Homepage Product request
UMS/SLZ-ASF in forged steel and central screw-on
UMS/SLZ-ASF in forged steel and central screw-on
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
UMS8/SLZ-ASF/30
60000
110
110
56
74
+7/-3
145
13.5
-
55
M16
22
-
22
18
ISOLOC to the machine boots STEEL LINE from forged steel and with SLOPING surfaces are the new patented universal precision machine shoes made from forged steel the consistent further development due to steadily increased requirements from the machine tool. The patented design, which is unterschei­det by all other leveling shoes, even the heaviest loads, at the same time smaller exterior dimensions, can be very precise level. Inclined surfaces ensure clearance 15 ° and zu­sammen with the, excellent power transmission to the Foundation or our highly absorbing double high rigidity compared to comparable elements made of cast, Schwingungsisolierplatten.

Center bolt-on or free-standing execution possible. On request with base widening plate BV for special requirements such as a very high dynamics in a machine or to reduce the surface pressure on the ground. A GPL 3025 anti-skid plate is located on the top and on the bottom of a Schwin­gungsisolierplatte.
This description was translated from German to English by "Bing Translator".
Product details Homepage Product request
UMS-ASA - screw-on with inclination compensation
UMS-ASA - screw-on with inclination compensation
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
UMS5-ASA/30
60000
110
110
65
80
+5/-4
145
13
36
55
22
M16
94
17
ASA - screwed to the machine, with inclination compensation

- Stable positioning on inclined floors or uneven machine support surfaces.
- Tension-free compensation of floor unevenness of up to 3° by means of sphere ring.

Equipment
Vibration insulation panels IPL on the bottom. Please select the desired vibration insulation panel.

You can see more types of our Machine Shoe UMS-ASA at our website, please use the link product details.
  • UMS-ASA
  • UMS-ASA
Product details Homepage Product request
UMS-ASF - screw-on or free-standing
UMS-ASF - screw-on or free-standing
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
UMS5-ASF/10
6000
110
110
50
68
+5/-4
145
13
36
55
22
M16
-
17
ASF - screw-on to the machine or free-standing

Equipment
Top side: delivery with Anti-Slip Panels GPL 3025 ex works. Bottom side: please select the desired Vibration Insulation Panel IPL.

Special equipment
Upon request with base enlarging plates BV for special requirements, e.g.

• very high dynamics of a machine or
• reduction of the contact pressure on the ground.

Some types of our machine shoes UMS-ASF are supplied with QR-codes. There you can find a summary of the most important technical data, installation instructions for the download as well as contact names.
  • UMS-ASF
  • UMS-ASF
  • UMS-ASF
  • UMS-ASF
  • UMS-ASF
UMS-DSA - through-hole with inclination compensation
UMS-DSA - through-hole with inclination compensation
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
UMS5-DSA/30
60000
110
110
65
80
+5/-4
145
13
36
55
22
22
94
17
DSA - through-bore for anchoring the machine to the floor with inclination compensation

- Stable positioning of the machine even on uneven floors.
- The machine has to be anchored to the floor through the machine pedestal after levelling.
- The screw is insulated in vibration engineering terms by Insulation Discs RONKAP.

Equipment
Vibration Insulation Panels IPL on the bottom. Please select the desired vibration insulation panel.

You can see more types of our Machine Shoe UMS-DSA at our website, please use the link product details.
  • UMS-DSA
Product details Homepage Product request
UMS-DSF - through-bore or freestanding
UMS-DSF - through-bore or freestanding
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
UMS5-DSF/30
60000
110
110
50
68
+5/-4
145
13
36
55
22
22
-
17
DSF - through-bore for anchoring the machine to the floor or free-standing

Equipment

Top side: delivery with Anti-Slip Panels GPL 3025 ex works.

Bottom side: please select the desired Vibration Insulation Panel IPL.

Some types of our machine shoes UMS-DSF are supplied with QR-codes. There you can find a summary of the most important technical data, installation instructions for the download as well as contact names.

You can see more types of our Machine Shoe UMS-DSF at our website, please use the link product details.
  • UMS-DSF
  • UMS-DSF
Product details Homepage Product request
UMS-KDS - through-hole, without vibration insulation panels
UMS-KDS - through-hole, without vibration insulation panels
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
UMS5-KDS
60000
110
110
50
-
+5/-4
145
13
36
55
22
22
-
17
KDS - through-hole for anchoring the machine to the floor, without vibration insulation

- No vibration insulation - therefore recommended if only a height compensation of the machine is required.
- Has to be used with anchoring to the floor.

Equipment:
none

You can see more sizes of our Machine Shoe UMS-KDS at our website, please use the link product details.
Product details Homepage Product request
UMS-KDSA - through-hole with inclination compensation, without vibration insulation panels
UMS-KDSA - through-hole with inclination compensation, without vibration insulation panels
Anti-vibration mount / vibration isulation
ISOLOC Schwingungstechnik GmbH
Anti-vibration mounts / vibration isulation
UMS5-KDSA
60000
110
110
65
-
+5/-4
145
13
36
55
22
22
94
17
KDSA – through-hole for anchoring the machine to the floor with inclination compensation, without vibration insulation

- For compensation of inclined floors or uneven machine support surfaces.
- No vibration insulation - therefore recommended if only a height compensation of the machine is required.
- The machine has to be anchored to the floor through the machine pedestal after levelling.

Equipment:
none

You can see more types of our Machine Shoe UMS-KDSA at our website, please use the link product details.
Product details Homepage Product request