Jongen Werkzeugtechnik
Products
146
Jongen Werkzeugtechnik GmbH
Shaving cutters, deburring tools
Jongen UNI-MILL VHM 460 Ti10
Solid carbide end mill solid Carbide 460 to vorwärtigen and back chamfering and deburring.
With this solid carbide end mill-type, it is possible in a direction of rotation - without spindle stop - and deburred on both sides.
The tools have a bevel angle of 45 ° and have a chamfer width 2-6 mm depending on diameter.
The shank is for a stable image of the tool, according to DIN 6535-HA as Glattschaft executed.
The solid carbide end mill of type 460 are available in the diameter ranges from 3-12 mm.
This description was translated from German to English by "Bing Translator".
Jongen UNI-MILL VHM 462 Ti10
|
Shaving cutters, deburring tool
Jongen Werkzeugtechnik GmbH
Shaving cutters, deburring tools
Quarter-circle solid carbide cutters solid Carbide 462 to fillet and deburring.
This solid carbide end mill-type is perfectly suitable to fillet edges, radii between 0.5 and 6, 0 can be on the work piece mm +/-0.02 to connect. This rounding is done by the outlet angles of the RADIUS on the tool sales-free.
By the type of Ti10 are the tools for processing of almost all materials such as structural steel, tool steel, tempered steel and unalloyed suitable low-alloy and high-alloy steel but also grey cast iron, nodular cast iron, aluminium, etc..
The shank is for a stable image of the tool, according to DIN 6535-HA as Glattschaft executed.
The type 462 solid carbide cutters are available in the diameter range from 8-20 mm.
This description was translated from German to English by "Bing Translator".
